Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Tools: tandem bead & cove cutting
By:scottbaxter
Date: 5/26/2012, 8:31 am
In Response To: Tools: tandem bead & cove cutting (Douglas Lee)

Doug,
I have a 2 router table with routers back to back and I just do the bead and switch sides and do the cove it goes pretty fast.
Scott

: Hello,
: I have a Veritas router table with a Porter Cable router (no micro
: adjustment), I dedicated this for bead cutting and locked it in.
: Just assembled a Bosch table router using again another Porter
: Cable with no micro adjustment. dedicating this one for coves.
: I tried every which way to tandem cut the strips but can not set it
: up so that the bit will cut counter clockwise into the strip
: for the bead and cove. One bit will cut counter clockwise but the
: other cuts clockwise into the strip.
: How do you all set them up to cut counter clockwise to the feed
: direction on both bead and cove?

: Thanks,
: Douglas

Messages In This Thread

Tools: tandem bead & cove cutting
Douglas Lee -- 5/25/2012, 9:04 pm
Re: Tools: tandem bead & cove cutting
ancient kayaker -- 5/25/2012, 11:27 pm
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 12:40 am
Re: Tools: tandem bead & cove cutting
ancient kayaker -- 5/25/2012, 11:38 pm
Re: Tools: tandem bead & cove cutting
Donovan -- 5/25/2012, 11:58 pm
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 12:48 am
Re: Tools: tandem bead & cove cutting
Bill Hamm -- 5/26/2012, 1:31 am
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 9:39 pm
Re: Tools: tandem bead & cove cutting
Donovan -- 5/26/2012, 1:47 pm
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 12:10 pm
Re: Tools: tandem bead & cove cutting *PIC*
Etienne Muller -- 5/26/2012, 3:35 am
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 9:58 am
Re: Tools: tandem bead & cove cutting *PIC*
Etienne Muller -- 5/27/2012, 2:49 am
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/28/2012, 1:43 pm
Re: Tools: tandem bead & cove cutting
scottbaxter -- 5/26/2012, 8:31 am
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 10:14 am
Re: Tools: tandem bead & cove cutting
Rod Tait (Orca Boats) -- 5/26/2012, 11:15 am
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 11:53 am
Re: Tools: tandem bead & cove cutting *PIC*
Don T -- 5/26/2012, 4:29 pm
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 9:20 pm
Re: Tools: tandem bead & cove cutting
Randy Echtinaw -- 5/29/2012, 9:18 pm
Re: Tools: tandem bead & cove cutting
Etienne Muller -- 5/30/2012, 6:42 am
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/30/2012, 3:35 pm
Re: Tools: tandem bead & cove cutting
ancient kayaker -- 5/30/2012, 5:33 pm
Re: Tools: tandem bead & cove cutting
Etienne Muller -- 5/30/2012, 6:11 pm
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/30/2012, 11:45 pm
Re: Tools: tandem bead & cove cutting
Dan Caouette -- 5/30/2012, 10:06 pm