Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Tools: tandem bead & cove cutting
By:Douglas Lee
Date: 5/25/2012, 9:04 pm

Hello,
I have a Veritas router table with a Porter Cable router (no micro adjustment), I dedicated this for bead cutting and locked it in.
Just assembled a Bosch table router using again another Porter Cable with no micro adjustment. dedicating this one for coves.
I tried every which way to tandem cut the strips but can not set it up so that the bit will cut counter clockwise into the strip
for the bead and cove. One bit will cut counter clockwise but the other cuts clockwise into the strip.
How do you all set them up to cut counter clockwise to the feed direction on both bead and cove?

Thanks,
Douglas

Messages In This Thread

Tools: tandem bead & cove cutting
Douglas Lee -- 5/25/2012, 9:04 pm
Re: Tools: tandem bead & cove cutting
ancient kayaker -- 5/25/2012, 11:27 pm
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 12:40 am
Re: Tools: tandem bead & cove cutting
ancient kayaker -- 5/25/2012, 11:38 pm
Re: Tools: tandem bead & cove cutting
Donovan -- 5/25/2012, 11:58 pm
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 12:48 am
Re: Tools: tandem bead & cove cutting
Bill Hamm -- 5/26/2012, 1:31 am
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 9:39 pm
Re: Tools: tandem bead & cove cutting
Donovan -- 5/26/2012, 1:47 pm
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 12:10 pm
Re: Tools: tandem bead & cove cutting *PIC*
Etienne Muller -- 5/26/2012, 3:35 am
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 9:58 am
Re: Tools: tandem bead & cove cutting *PIC*
Etienne Muller -- 5/27/2012, 2:49 am
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/28/2012, 1:43 pm
Re: Tools: tandem bead & cove cutting
scottbaxter -- 5/26/2012, 8:31 am
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 10:14 am
Re: Tools: tandem bead & cove cutting
Rod Tait (Orca Boats) -- 5/26/2012, 11:15 am
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 11:53 am
Re: Tools: tandem bead & cove cutting *PIC*
Don T -- 5/26/2012, 4:29 pm
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/26/2012, 9:20 pm
Re: Tools: tandem bead & cove cutting
Randy Echtinaw -- 5/29/2012, 9:18 pm
Re: Tools: tandem bead & cove cutting
Etienne Muller -- 5/30/2012, 6:42 am
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/30/2012, 3:35 pm
Re: Tools: tandem bead & cove cutting
ancient kayaker -- 5/30/2012, 5:33 pm
Re: Tools: tandem bead & cove cutting
Etienne Muller -- 5/30/2012, 6:11 pm
Re: Tools: tandem bead & cove cutting
Douglas Lee -- 5/30/2012, 11:45 pm
Re: Tools: tandem bead & cove cutting
Dan Caouette -- 5/30/2012, 10:06 pm