Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Starting tommorrow
By:joel Franklin
Date: 3/4/2009, 2:12 pm
In Response To: Strip: Starting tommorrow (joel Franklin)

: starting my kayak in the morning. Only thing scary is am going to build a
: strip boat but using skin frame as mold. Would anyone around no if it is
: alright to do.
: lots of thanks
: joel
I'm not sure who built this frame they are closer then 12" together, my idea is to rebuild the frame laminating gun whales, deck beams, and ribs. I have got quite a lot of experience working with wood and will be stripping with hand dried maple, pine, and inlays of blood wood, and a purple wood i think onaki or something similar. I should have started with this write up instead of the one sentence on the top. Here is another concern, going to be using wood that is not long enough for one strip, planning to inlay design even below water line now I have read about sandwich core construction and seen a couple notes on here stating that scarf jointing is not a real gain in strength compared to a but joint with the epoxy fiber glass laminated wood this still be true if your but joint was oriented near to each other vertically the lamination was going to be pic of a whale spouting on sides and a tribal design on top.
Thanks again
Joel Franklin
P.S.
I must also thank everybody on the sight for all the past reading and info since I've been reading info for about a year. No way, I would have imagined all the info you all are willing to impart on all of us, I actually feel confident in this undertaking.
Thanks Again

Messages In This Thread

Strip: Starting tommorrow
joel Franklin -- 3/3/2009, 11:11 pm
Re: Strip: Starting tommorrow
Etienne Muller -- 3/4/2009, 5:07 pm
Re: Strip: Starting tommorrow
joel Franklin -- 3/4/2009, 2:12 pm
Re: Strip: Starting tommorrow
Bill Hamm -- 3/5/2009, 12:25 am
Re: Strip: Starting tommorrow
joel Franklin------WebKitFormBoundaryx5t3mwC5+uNOT -- 3/5/2009, 3:46 am
Re: Strip: Starting tommorrow
Bill Hamm -- 3/5/2009, 12:22 am
Re: Strip: Starting tommorrow
Bryan Hansel -- 3/4/2009, 9:01 am
Re: Strip: Starting tommorrow
Kent LeBoutillier -- 3/4/2009, 5:59 am
Re: Strip: Starting tommorrow
Bill Hamm -- 3/4/2009, 12:27 am