Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: Glued frame or not
By:Randy Knauff
Date: 1/21/2009, 4:47 pm
In Response To: Skin-on-Frame: Glued frame or not (Clayton Plunkett)

I built a double skin on frame many years ago and glued and screwed the whole frame. Cross pieces and floor boards had small half inch blocks on each side to give more glue surface to the stringers. Worked great, no problems. I built that because I didn't have the $400 it cost for a new Klepper with rudder and spray skirt(quite a while back).
Randy

Messages In This Thread

Skin-on-Frame: Glued frame or not
Clayton Plunkett -- 1/19/2009, 8:18 pm
Re: Skin-on-Frame: Glued frame or not
Randy Knauff -- 1/21/2009, 4:47 pm
Re: Skin-on-Frame: Glued frame or not
Will Clarke -- 1/21/2009, 7:36 pm
Re: Skin-on-Frame: Glued frame or not
Bill Hamm -- 1/22/2009, 2:12 am
Re: Skin-on-Frame: Glued frame or not
Will Clarke -- 1/23/2009, 8:10 am
Re: Skin-on-Frame: Glued frame or not *Pic*
Dave Gentry -- 1/21/2009, 10:20 pm
Re: Skin-on-Frame: Glued frame or not
Doug S -- 1/22/2009, 8:17 am
Re: Skin-on-Frame: Glued frame or not
Bill Hamm -- 1/25/2009, 1:06 am
Re: Skin-on-Frame: Glued frame or not
Daniel from sweden -- 1/24/2009, 1:18 pm
Re: Skin-on-Frame: Glued frame or not
Bill Hamm -- 1/25/2009, 1:09 am
Re: Skin-on-Frame: Glued frame or not *Pic*
Dave Gentry -- 1/24/2009, 3:34 pm
Re: Skin-on-Frame: Glued frame or not
Daniel from sweden -- 1/24/2009, 5:50 pm
Re: Skin-on-Frame: Glued frame or not
Dave Gentry -- 1/23/2009, 9:27 am
Re: Skin-on-Frame: Glued frame or not
Tom Yost -- 1/21/2009, 7:51 pm
Re: Skin-on-Frame: Glued frame or not
Jay Babina -- 1/20/2009, 9:11 am
Re: Skin-on-Frame: Glued frame or not
Dave Isbell -- 1/19/2009, 11:10 pm
Re: Skin-on-Frame: Glued frame or not
Scott Shurlow -- 1/19/2009, 8:36 pm
Re: Skin-on-Frame: Glued frame or not
Clayton Plunkett -- 1/19/2009, 9:35 pm
Re: Skin-on-Frame: Glued frame or not
Scott Shurlow -- 1/20/2009, 4:47 pm
Re: Skin-on-Frame: Glued frame or not
Mike Bielski -- 1/20/2009, 9:09 am