Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: 3/8" half oval brass band
By:John Van Buren
Date: 12/28/2007, 9:34 am
In Response To: Re: 3/8" half oval brass band (mike b)

: What is the most effective way to attach the brass bands to the hull?

I have had good sucess using steel screws in correctly sized pilot holes then replacing them with brass screws. The steel screws cut a nice path for the brass screws. If you use brass alone some will snap unless you cut the holes first.

John VB

Messages In This Thread

Strip: Stem protection
Chuck Clark -- 12/23/2007, 7:04 pm
3/8" half oval brass band
Leeg -- 12/25/2007, 9:02 am
Re: 3/8" half oval brass band
mike b -- 12/26/2007, 8:56 pm
Re: 3/8" half oval brass band
John Van Buren -- 12/28/2007, 9:34 am
Re: 3/8" half oval brass band
Bill Hamm -- 12/28/2007, 12:34 pm
Re: 3/8" half oval brass band
mike b -- 12/28/2007, 6:58 pm
Re: 3/8" half oval brass band
Paul G. Jacobson -- 12/27/2007, 6:09 pm
Re: 3/8" half oval brass band
Glen Smith -- 12/27/2007, 7:47 pm
Re: Strip: Stem protection
don -- 12/24/2007, 12:23 pm
Re: Strip: Stem protection
John Monroe -- 12/25/2007, 4:35 am
Re: Strip: Stem protection
don -- 12/25/2007, 1:51 pm
Re: Strip: Stem protection
Bill Hamm -- 12/25/2007, 5:19 am
Re: Strip: Stem protection
John Monroe -- 12/26/2007, 4:35 am
Re: Strip: Stem protection
Bill Hamm -- 12/31/2007, 2:32 am
Re: Strip: Stem protection
John Monroe -- 12/31/2007, 5:42 am
Re: Strip: Stem protection
Gennie -- 12/25/2007, 5:29 am
Don't use Kevlar!
ChuckS -- 12/24/2007, 9:40 am
Re: Strip: Stem protection *Pic*
John Monroe -- 12/24/2007, 4:43 am
Re: Strip: Stem protection
Bill Hamm -- 12/24/2007, 1:08 am
Re: Strip: Stem protection
Chuck Clark -- 12/24/2007, 11:02 am
Re: Strip: Stem protection
Bill Hamm -- 12/24/2007, 1:06 am