Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

3/8" half oval brass band
By:Leeg
Date: 12/25/2007, 9:02 am
In Response To: Strip: Stem protection (Chuck Clark)

adding layers of cloth that require fairing in is inefficient. The high wear area is in one spot, applying strips of cloth puts more material besides the high wear area.
There's no end of possibilities with rope soaked in epoxy to thickened epoxy putty to brass bands. I'd just do the brass and be done with it.

Messages In This Thread

Strip: Stem protection
Chuck Clark -- 12/23/2007, 7:04 pm
3/8" half oval brass band
Leeg -- 12/25/2007, 9:02 am
Re: 3/8" half oval brass band
mike b -- 12/26/2007, 8:56 pm
Re: 3/8" half oval brass band
John Van Buren -- 12/28/2007, 9:34 am
Re: 3/8" half oval brass band
Bill Hamm -- 12/28/2007, 12:34 pm
Re: 3/8" half oval brass band
mike b -- 12/28/2007, 6:58 pm
Re: 3/8" half oval brass band
Paul G. Jacobson -- 12/27/2007, 6:09 pm
Re: 3/8" half oval brass band
Glen Smith -- 12/27/2007, 7:47 pm
Re: Strip: Stem protection
don -- 12/24/2007, 12:23 pm
Re: Strip: Stem protection
John Monroe -- 12/25/2007, 4:35 am
Re: Strip: Stem protection
don -- 12/25/2007, 1:51 pm
Re: Strip: Stem protection
Bill Hamm -- 12/25/2007, 5:19 am
Re: Strip: Stem protection
John Monroe -- 12/26/2007, 4:35 am
Re: Strip: Stem protection
Bill Hamm -- 12/31/2007, 2:32 am
Re: Strip: Stem protection
John Monroe -- 12/31/2007, 5:42 am
Re: Strip: Stem protection
Gennie -- 12/25/2007, 5:29 am
Don't use Kevlar!
ChuckS -- 12/24/2007, 9:40 am
Re: Strip: Stem protection *Pic*
John Monroe -- 12/24/2007, 4:43 am
Re: Strip: Stem protection
Bill Hamm -- 12/24/2007, 1:08 am
Re: Strip: Stem protection
Chuck Clark -- 12/24/2007, 11:02 am
Re: Strip: Stem protection
Bill Hamm -- 12/24/2007, 1:06 am