Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

More on pvc frames *Pic*
By:Paul G. Jacobson
Date: 11/29/2007, 4:36 pm
In Response To: Re: Skin-on-Frame: pvc frame (Paul G. Jacobson)

here is the general idea on how to attach the plywood to the PVC. This illustration doesn't show any additional plastic or wood inside the pipe, but having something there would give the screw more to bite into.

The plywood does not extend as far out as the pipe, so the fabric for the skin rides only on the smooth PVC pipe. The width and length of the plywood will be determined by the spacing of the kayak's frames, the distance between the pipes, the number of sections of PVC pipe used along the length of the boat, and the number of frames. Make the frames first. Use duct tape to hold the PVC in place on the frames. Attach the ends of the PVC to the bow and stern forms. Then measure and install the plywood bracing for the sidewalls to fit. After that you fit the floor to brace and support the keel tube or tubes.

PGJ

Messages In This Thread

Skin-on-Frame: pvc frame
Scott Shurlow -- 11/25/2007, 5:05 pm
Re: Skin-on-Frame: pvc frame
Paul G. Jacobson -- 11/29/2007, 2:30 pm
More on pvc frames *Pic*
Paul G. Jacobson -- 11/29/2007, 4:36 pm
Re: More on pvc frames
Charlie -- 11/29/2007, 4:40 pm
Re: More on pvc frames
Paul G. Jacobson -- 11/29/2007, 8:33 pm
Re: More on pvc frames
Charlie -- 11/29/2007, 11:17 pm
Re: More on pvc frames
Paul G. Jacobson -- 11/30/2007, 6:47 am
Re: More on pvc frames
Mike Savage -- 11/30/2007, 5:45 pm
Re: More on pvc frames
Paul G. Jacobson -- 12/1/2007, 12:47 am
Re: More on pvc frames
Mike Savage -- 12/1/2007, 8:10 am
Standing on the shoulders of giants
Paul G. Jacobson -- 12/1/2007, 12:49 pm
Re: Standing on the shoulders of giants
Mike Savage -- 12/1/2007, 6:03 pm
Re: More on pvc frames
Charlie -- 11/30/2007, 12:25 pm
And then there are other technologies . . .
Paul G. Jacobson -- 12/1/2007, 12:01 am
Re: More on pvc frames
Mike Savage -- 11/29/2007, 7:54 pm
Re: Skin-on-Frame: pvc frame
Niven -- 11/26/2007, 2:03 am
Re: Skin-on-Frame: pvc frame
kelly t -- 11/26/2007, 7:34 pm
Re: Skin-on-Frame: pvc frame
Scott Shurlow -- 11/26/2007, 8:02 am
Re: Skin-on-Frame: pvc frame
Niven -- 11/27/2007, 3:32 am
Re: Skin-on-Frame: pvc frame *LINK*
Niven -- 11/27/2007, 3:47 am
Re: Skin-on-Frame: pvc frame
Charlie -- 11/25/2007, 6:22 pm
Re: Skin-on-Frame: pvc frame
Scott Shurlow -- 11/26/2007, 8:09 am
Re: Skin-on-Frame: pvc frame
Charlie -- 11/26/2007, 10:44 am
Re: Skin-on-Frame: pvc frame
Scott Shurlow -- 11/27/2007, 6:07 am
Re: Skin-on-Frame: pvc frame
Bill Hamm -- 11/28/2007, 1:59 am
Re: Skin-on-Frame: pvc frame
Dan Caouette (CSFW) -- 11/28/2007, 2:02 pm
Re: Skin-on-Frame: pvc frame
Bill Hamm -- 11/29/2007, 2:31 am
Re: Skin-on-Frame: pvc frame
Mike Savage -- 11/27/2007, 1:23 pm
Maybe this, instead *LINK*
Dave G -- 11/26/2007, 10:24 am