Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

freeship stuff + vers 2.78 link *LINK*
By:mike allen
Date: 9/4/2007, 3:13 pm
In Response To: Re: freeship is still continuing - at vers 2.78 (Dave Reekie)

: - is there any chance you could elaborate on the last two
: about connecting points ACROSS panels and doing the visual check on the
:display net?

The feel that I get with freeship is as if I am stretching a sheet of thin balloon type rubber between the 2, 3 or 4 seams of a panel - and you can see the surface behaving like this if you turn up the fineness and get down close to the panel edge near a non-corner point. The difficulty is that the edges are now harder to fair because of more points and the curvature analysis tool is very crude (but useful none the less).

For example if you have a panel shaped like a crescent moon (maybe like the ends of yr yak IF you have bunch of points there, you have to be careful that the stretchy surface doesn’t fold back over itself on the inside of the moon. The way to drive it flat is to add seams (not creases) across the panel. It never flattens out perfectly, but doing that makes a huge difference. Like it’s quite humourous to get down close to the cockpit and see how the panel doubles itself into the opening if you don’t put a whole pile of little seams across to the gunwale.

I think I said it wrong the last time, but the panel edges have got to be creased (as well as on a diff layer and ea layers developability checked)

And another good idea is to plot (or examine, at least) the station lines on the panels so that you know exactly where and how the panels meet. By doing this you eliminate the flipping problem and have assurance you are doing it as best as poss.

There are lots and lots of places to make mistakes on this stuff and often you (me, anyone) end up paying the dues of bitter experience - but as already stated, models, models, models are quick and will save your butt and show you things that you never even thought of. I make mine at ¼ full size as that size is robust, easy to fix when dropped, and large enough to show problems.

mick

"freeship plus"

Messages In This Thread

S&G: Delftship panel shape development *LINK* *Pic*
Dave Reekie -- 9/3/2007, 4:35 am
Just a thought...
Jay Doorly -- 9/4/2007, 12:02 am
Re: S&G: Delftship panel shape development
Bryan Hansel -- 9/3/2007, 1:59 pm
Re: S&G: Delftship panel shape development
Bryan Hansel -- 9/3/2007, 2:05 pm
Re: S&G: Delftship panel shape development
Dave Reekie -- 9/3/2007, 2:12 pm
Re: S&G: Delftship panel shape development *Pic*
Duane Strosaker -- 9/3/2007, 1:26 pm
Re: S&G: Delftship panel shape development
Dave Reekie -- 9/3/2007, 1:37 pm
Re: S&G: Delftship panel shape development
HenkA -- 9/3/2007, 9:53 pm
Re: S&G: Delftship panel shape development
Robert McMurray -- 9/4/2007, 10:33 am
Re: S&G: Delftship panel shape development
Dave Reekie -- 9/4/2007, 11:14 am
Re: S&G: Delftship panel shape development
Robert McMurray -- 9/4/2007, 11:46 am
Re: S&G: Delftship panel shape development
Bill Hamm -- 9/5/2007, 2:19 am
Re: torture *Pic*
Robert McMurray -- 9/6/2007, 12:19 am
Re: S&G: Delftship panel shape development
Toni V -- 9/4/2007, 2:43 am
Re: S&G: Delftship panel shape development
HenkA -- 9/4/2007, 10:08 am
Re: S&G: Delftship panel shape development
Nick Schade - Guillemot Kayaks -- 9/4/2007, 11:01 am
Re: S&G: Delftship panel shape development
Dave Reekie -- 9/4/2007, 4:26 am
Re: S&G: Delftship panel shape development
Bryan Hansel -- 9/4/2007, 12:14 am
Re: S&G: Delftship panel shape development
HenkA -- 9/4/2007, 12:37 am
Re: S&G: Delftship panel shape development
HenkA -- 9/5/2007, 12:41 am
Re: S&G: Delftship panel shape development
David Reekie -- 9/8/2007, 8:11 am
Re: S&G: Delftship panel shape development
Bill Hamm -- 9/12/2007, 4:53 am
bending ply *Pic*
mike allen -- 9/12/2007, 11:57 am
Re: bending ply
Bill Hamm -- 9/16/2007, 3:20 am
Re: bending ply
Bryan Hansel -- 9/12/2007, 1:30 pm
s&g (developable) surf kayaks *Pic*
mike allen -- 9/12/2007, 2:23 pm
Re: s&g (developable) surf kayaks
Bryan Hansel -- 9/12/2007, 11:54 pm
another s&g (developable) surf kayak: *Pic*
mike allen -- 9/13/2007, 1:30 am
Re: another s&g (developable) surf kayak:
Bryan Hansel -- 9/13/2007, 7:13 pm
a s&g freeship surf kayak - the 'rail' *Pic*
mike allen -- 9/14/2007, 1:33 am
Re: a s&g freeship surf kayak - the 'rail'
Bryan Hansel -- 9/15/2007, 7:45 pm
some freeship techniques *Pic*
mike allen -- 9/16/2007, 3:46 am
Re: some freeship techniques
Bryan Hansel -- 9/17/2007, 5:04 pm
more freeship techniques *Pic*
mike allen -- 9/18/2007, 2:33 am
Re: more freeship techniques
Bryan Hansel -- 9/18/2007, 9:11 pm
control curve vs actual shape curve
mike allen -- 9/18/2007, 9:46 pm
Re: more freeship techniques
Bryan Hansel -- 9/18/2007, 9:07 pm
Re: more freeship techniques
Nick Schade - Guillemot Kayaks -- 9/18/2007, 8:56 am
corrupted curvature
mike allen -- 9/18/2007, 3:32 pm
Re: corrupted curvature
Toni V -- 9/19/2007, 6:49 am
Re: corrupted curvature
mike allen -- 9/19/2007, 2:42 pm
Re: corrupted curvature
Toni V -- 9/20/2007, 6:11 am
Re: corrupted curvature
mike allen -- 9/20/2007, 7:39 am
Re: corrupted curvature
Bill Hamm -- 9/18/2007, 6:43 pm
Re: corrupted curvature
Nick Schade - Guillemot Kayaks -- 9/19/2007, 12:56 pm
Re: corrupted curvature
HenkA -- 9/19/2007, 8:26 am
the magic *Pic*
mike allen -- 9/19/2007, 12:41 am
Re: Somebody has to ask....
TOM RAYMOND -- 9/19/2007, 12:16 pm
Re: Somebody has to ask.... *Pic*
mike allen -- 9/20/2007, 3:02 pm
Re: Somebody has to ask....
TOM RAYMOND -- 9/20/2007, 4:32 pm
some are a little more normal *Pic*
mike allen -- 9/21/2007, 3:58 am
Re: some are a little more normal
Bryan Hansel -- 9/21/2007, 8:33 am
Re: some are a little more normal
mike allen -- 9/21/2007, 12:16 pm
freeship sketch version of 'solitude 15' *Pic*
mike allen -- 9/22/2007, 6:33 am
freeship 'solitude 15' - 90 deg panel twist
mike allen -- 9/25/2007, 2:07 pm
Re: a s&g freeship surf kayak - the 'rail'
Ken Blanton -- 9/14/2007, 7:00 am
Re: a s&g freeship surf kayak - the 'rail'
mike allen -- 9/14/2007, 5:03 pm
'la ligne' - another s&g freeship surf kayak *Pic*
mike allen -- 9/14/2007, 2:18 am
Re: S&G: Delftship panel shape development
Bryan Hansel -- 9/5/2007, 1:09 pm
freeship is still continuing - at vers 2.78
mike allen -- 9/4/2007, 12:08 pm
Re: freeship is still continuing - at vers 2.78
Dave Reekie -- 9/4/2007, 1:43 pm
freeship stuff + vers 2.78 link *LINK*
mike allen -- 9/4/2007, 3:13 pm
Re: freeship stuff + vers 2.78 link
Toni V -- 9/5/2007, 4:04 pm
Re: freeship stuff + vers 2.78 link
mike allen -- 9/5/2007, 4:31 pm
Update *LINK* *Pic*
David Reekie -- 9/8/2007, 8:39 am
Update comments
mike allen -- 9/10/2007, 1:26 pm
Re: Update comments
Toni V -- 9/11/2007, 7:55 am
Re: Update comments
mike allen -- 9/11/2007, 11:55 am
Re: S&G: Delftship panel shape development
Toni V -- 9/3/2007, 10:27 am
Re: S&G: Delftship panel shape development
HenkA -- 9/3/2007, 9:42 pm
Re: S&G: Delftship panel shape development *Pic*
Robert McMurray -- 9/3/2007, 1:15 pm
Re: S&G: Delftship panel shape development
Dave Reekie -- 9/3/2007, 1:23 pm
Re: S&G: Delftship panel shape development
Robert McMurray -- 9/3/2007, 3:13 pm
Re: S&G: Delftship panel shape development
Dave Reekie -- 9/3/2007, 1:14 pm
Re: S&G: Delftship panel shape development
Toni V -- 9/3/2007, 2:47 pm
Re: S&G: Delftship panel shape development *LINK*
Daren -- 9/3/2007, 8:46 am