Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: pigmented epoxy?
By:Jon Limebrook
Date: 8/22/2001, 9:50 pm
In Response To: Re: pigmented epoxy? (Jim Kozel)

Thanks for the tip. That's a very pretty boat you've got there. Here in California you're not required to get numbers for paddle- or oar-powered only boats. Until I verified that with the DMV I was downright depressed at the prospect of sticking big plastic numbers on my hull.

: I just finished my S & G Pygmy Arctic Tern with a water-based urethane
: finish from System Three. I tinted it red for a transparent finish. System
: Three also sells that finish in solid colors. It's cross-linked and I've
: been very impressed with its ability to resist dings and scrapes. You can
: see how the finish looks at the link I've provided. So, you can tint the
: clear coat or buy it in a solid color.

Messages In This Thread

pigmented epoxy?
Jon Limebrook -- 8/21/2001, 9:25 pm
Re: pigmented epoxy?
Pete Rudie -- 8/21/2001, 11:21 pm
Re: pigmented epoxy?
Jim Kozel -- 8/22/2001, 9:57 am
Re: pigmented epoxy?
Jon Limebrook -- 8/22/2001, 9:50 pm
Re: pigmented epoxy - boat numbers
Jim Kozel -- 8/23/2001, 9:41 am