Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Outdoor sanding.
By:Pete Rudie
Date: 3/31/2001, 12:44 pm
In Response To: Outdoor sanding. *Pic* (John Monfoe)

Gorgeous little craft, John. Looks like the rolling bevel at the stems, the gap at the hull/deck joint and all the other niggling details got sorted out just fine. Any plans for when this one is done?

: Hay guys, If I am posting too many picture of the same old boat as I progress
: just say so and I will keep it down. Too much time on my hands. I finally
: got out of the little cramped room I have been working in, and out into
: the light so I can see to sand. It's been a long winter. The metal pieces
: holding the web straps you may recognize as ends to hold firewood from
: falling down. My epoxy and fiberglass is on the way and I hope to be doing
: that in a couple of weeks. The straight sides of the cockpit will be left
: that way and I will build the water tight storage areas straight down from
: there, that I believe will make this boat a safe self rescuing boat when
: flooded, by crawing into the cockpit from the side. I will try to
: demonstrate that with picture when I have that built in and ready for
: testing.

: John

Messages In This Thread

Outdoor sanding. *Pic*
John Monfoe -- 3/30/2001, 9:08 am
Re: Outdoor sanding.
Bob -- 4/1/2001, 10:45 am
Re: Outdoor sanding.
Pete Rudie -- 3/31/2001, 12:44 pm
Re: Outdoor sanding.
John Monfoe -- 4/1/2001, 6:33 am
Re: Outdoor sanding.
Rick Morgan -- 3/30/2001, 10:44 pm
Re: Outdoor sanding.
David Hanson -- 3/30/2001, 8:26 pm
Re: Outdoor sanding.
Richard Boyle -- 3/30/2001, 5:32 pm
Re: Outdoor sanding.
Geo. Cushing -- 3/30/2001, 4:21 pm
Re: Outdoor sanding.
Ben -- 3/30/2001, 12:45 pm
Re: Outdoor sanding.
Elliott -- 3/30/2001, 12:06 pm
Re: Outdoor sanding.
Steve -- 3/30/2001, 9:19 am