Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: CPVC and Hot Air
By:Dean G.
Date: 3/31/2001, 10:06 am
In Response To: Re: CPVC and Hot Air (Spidey)

You're right Spidey,
It's been a while since I have purchased this type of PVC, but it is CPVC instead of HPVC. Thanks for the correction...
Dean

Hi Kent;

: CPVC (chloro-polyvinyl chloride) is the stuff designed for hot water use, and
: may withstand your steaming use. I've been using that on my flutes . . .
: :)

: I started steaming but switched to an industrial hot air gun. Makes the cedar
: strips very soft & pliable, and when they cool (minutes) you get to
: gluing. I even set up a simple jig to assist, but neglected to take any
: pics. You might try a combination, for quick-drying them . . .

: Best Regards, Spidey

Messages In This Thread

Steam bending
Kent LeBoutillier -- 3/29/2001, 12:03 pm
Re: Steam bending
Arthur -- 3/30/2001, 3:59 am
Re: Steam bending *Pic*
Rehd -- 3/30/2001, 1:46 am
Re: CPVC and Hot Air
Spidey -- 3/29/2001, 10:57 pm
Re: CPVC and Hot Air
Dean G. -- 3/31/2001, 10:06 am
Re: Steaming and Hot air guns
Shawn Baker -- 3/30/2001, 3:52 pm
Re: Steaming and Hot air guns
Spidey -- 3/30/2001, 6:53 pm
What type of heat gun?
Steve -- 4/3/2001, 10:31 am
Re: What type of heat gun?
John Monfoe -- 4/4/2001, 5:27 am
Re: Steam bending
marc leclerc -- 3/29/2001, 10:57 pm
Re: Steam bending
Dick Gamble -- 3/29/2001, 2:19 pm
Re: Steam bending
Dean G. -- 3/29/2001, 4:10 pm
Re: Steam bending
Steve Lein -- 3/29/2001, 1:51 pm
Getting bent *Pic*
Bill Price -- 3/29/2001, 3:37 pm
Re: Steam bending
Rob Macks -- 3/29/2001, 3:07 pm
Re: Steam bending
Kent LeBoutillier -- 3/29/2001, 2:01 pm
Re: Steam bending
Elliott -- 3/29/2001, 1:41 pm