: I have just finished the 4th coat of epoxy on an Osprey and it looks like at
: certain places there are pockmarks. The question is should I add an
: aditional epoxy coat? Have me previos coats been to thin? (BTW i used a
: 3/16 roller...)If I leave these marks will they disspear after I finish
: the boat with urethane? I have afraid of adding dead weight to the boat
: given previos posts to this BB.

Whenever you get a bubbled, pock marked or otherwise irregular surface you should stop coating, because successive coats will make it worse.

Time to stop coating. Let it harden a couple days, wash off any amine blush and sand smooth. You can recoat then if you wish or need to.

Rob