Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Varnishing and temperatures
By:John B.
Date: 6/13/2000, 8:19 am
In Response To: Varnishing and temperatures (Nancy)

Nancy,

I went and actually read the back of the can of z-spar Flagship varnish I've been using. It said that it shouldn't be applied if the temperature is expected to drop below 40F. So maybe that stuff will work OK in your conditions? Or maybe all brands of varnish say the same thing.

Good Luck

Messages In This Thread

Varnishing and temperatures
Nancy -- 6/10/2000, 7:03 am
Re: Varnishing and temperatures
John B. -- 6/13/2000, 8:19 am
Re: Varnishing and temperatures
Ken Sarkozy -- 6/11/2000, 11:13 am
Re: Varnishing and temperatures
Mike Hanks -- 6/11/2000, 3:20 am
Re: Varnishing and temperatures
Jason -- 6/12/2000, 10:02 am
Re: Varnishing and temperatures
Rehd -- 6/11/2000, 3:02 am
Re: Varnishing and temperatures
Ray -- 6/10/2000, 11:23 pm
Re: Varnishing and temperatures
John B. -- 6/10/2000, 1:23 pm
Re: Varnishing and temperatures
Nancy -- 6/10/2000, 8:15 pm
Re: Varnishing and temperatures
Earl Bailey -- 6/10/2000, 12:33 pm
Re: Varnishing and temperatures
Nancy -- 6/10/2000, 8:20 pm
Re: Varnishing and temperatures
Ian Johnston -- 6/10/2000, 11:19 am
Re: Varnishing and temperatures
Nancy -- 6/10/2000, 8:18 pm
Re: OOOPS!!!
Ian Johnston -- 6/12/2000, 12:04 am