Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Varnishing and temperatures
By:John B.
Date: 6/10/2000, 1:23 pm
In Response To: Varnishing and temperatures (Nancy)

: Anyway you could get it into the house, through a window or door? The stuff I'm using requires 18 hrs. between coats, so it'll take about a week...pets in the house at that time may not be a good idea. The z-spar Flagship doesn't smell much. And you might have better dust control indoors. Use plenty of dropcloths, etc. if this is your first, as the varnish, particularly thinned coats may run off the boat onto the floor.

Messages In This Thread

Varnishing and temperatures
Nancy -- 6/10/2000, 7:03 am
Re: Varnishing and temperatures
John B. -- 6/13/2000, 8:19 am
Re: Varnishing and temperatures
Ken Sarkozy -- 6/11/2000, 11:13 am
Re: Varnishing and temperatures
Mike Hanks -- 6/11/2000, 3:20 am
Re: Varnishing and temperatures
Jason -- 6/12/2000, 10:02 am
Re: Varnishing and temperatures
Rehd -- 6/11/2000, 3:02 am
Re: Varnishing and temperatures
Ray -- 6/10/2000, 11:23 pm
Re: Varnishing and temperatures
John B. -- 6/10/2000, 1:23 pm
Re: Varnishing and temperatures
Nancy -- 6/10/2000, 8:15 pm
Re: Varnishing and temperatures
Earl Bailey -- 6/10/2000, 12:33 pm
Re: Varnishing and temperatures
Nancy -- 6/10/2000, 8:20 pm
Re: Varnishing and temperatures
Ian Johnston -- 6/10/2000, 11:19 am
Re: Varnishing and temperatures
Nancy -- 6/10/2000, 8:18 pm
Re: OOOPS!!!
Ian Johnston -- 6/12/2000, 12:04 am