Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Plywood Bulkheads
By:Jason A.
Date: 4/25/2000, 7:30 pm
In Response To: Plywood Bulkheads (DaveW)

I just installed the bulkhead with a fillet on either side made from thickened epoxy and then coated each side with a nice coat of epoxy. That's it, nice and sweet. I have used to boat two seasons (April - November), have rolled it, filled it, etc with NO problems.

I say skip the glassing part and use a fillet and coat with epoxy.

Get it done so you can use it.

Messages In This Thread

Plywood Bulkheads
DaveW -- 4/25/2000, 6:20 pm
Re: Plywood Bulkheads
Wayne g. -- 4/26/2000, 11:36 pm
Re: One Reason to Glass Plywood Bulkheads
Shawn B -- 4/26/2000, 12:07 pm
Re: Plywood Bulkheads
John B. -- 4/25/2000, 10:01 pm
Re: Plywood Bulkheads
Dennis -- 4/25/2000, 7:42 pm
Re: Plywood Bulkheads
Bill Heuser -- 4/25/2000, 9:51 pm
Re: Plywood Bulkheads
Jason A. -- 4/25/2000, 7:30 pm
Re: Plywood Bulkheads
Eric Schade (Shearwater Boats) -- 4/30/2000, 12:51 pm
Re: Plywood Bulkheads
Berkeley C. -- 4/26/2000, 11:26 am
Re: Plywood Bulkheads
Erez -- 4/25/2000, 7:20 pm
Re: Plywood Bulkheads
Dean Trexel -- 4/25/2000, 7:01 pm
Re: Thin Plywood Bulkheads
Shawn B -- 4/26/2000, 11:44 am
Re: Outer Island update
Dean Trexel -- 4/26/2000, 7:45 pm