Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Using Different Epoxies
By:Doyle
Date: 2/24/2000, 8:20 am
In Response To: Using Different Epoxies (Fritz OConnor)

> I wrote this message earlier today. I didn't post. I am building an Arctic
> Tern, and may not be able to finish the kayak with the supplied epoxy.
> Will I encounter any problems if I use a different manufacturer's epoxy to
> finish? I can buy epoxy at a local marine store or buy the same epoxy
> supplied with the kit from Pygmy.

I have used System 3 and West on the same boat with no problem.

Messages In This Thread

Using Different Epoxies
Fritz OConnor -- 2/23/2000, 6:51 pm
Re: Using Different Epoxies
Chris in Cajun Country -- 2/24/2000, 4:54 pm
Re: Using Different Epoxies
Fritz OConnor -- 2/29/2000, 7:55 pm
Boat Weights
Dennis -- 2/25/2000, 7:16 pm
Boat Weight
Chris Menard -- 2/25/2000, 8:20 am
Re: Boat Weight
Mike Scarborough -- 2/27/2000, 10:39 am
Re: Boat Weight
Mike Hanks -- 2/25/2000, 11:56 am
Re: Boat Weight
lee -- 2/25/2000, 12:11 pm
Re: Boat Weight
Shawn Baker -- 2/25/2000, 11:35 am
Re: Using Different Epoxies
Doyle -- 2/24/2000, 8:20 am
Re: Using Different Epoxies
Mike Hanks -- 2/23/2000, 11:26 pm