> I´ve glassed the deck and the hull, inside as well as outside. Now I am
> going to put them together. But do I need to put an extra layer of epoxy
> on the inside of the hull to make sure no water will reach the wood. The
> fibers is easy to see on the inside, but I would prefer not to use an
> extra layer, because of weight and cost. Fritjof Karlsson I've just finished my Great Auk. I used only enough epoxy on the inside of the hull & deck to make sure the glass was properly attached to the timber. This has given me a very light, strong boat. The only advantage I can see from extra glass inside is the smoother finish, which would be slightly easier to clean. Otherwise, the extra epoxy will only add unnecessary weight.