> I am a new builder. I am beginning the stitching of the keel panels. The
> problem I am experiencing is that the sharp edges of the panels make it
> difficult to maintain alignment near the bow and stern. The sharp edges
> keep popping over each other as I pinch the panels together. It seems like
> the edges should be beveled where they meet in these areas but there is
> nothing in the instructions regarding that. Any suggestions would be
> appreciated.

I had the same problem on a Pygmy Coho, only I didn't realize it till I had glued the keel together. I worried if this would hurt the finished boat's ability to stay on course, but it doesn't -- so long as the keel is straight it tracks perfectly.