> It's late here and I am not sure if Pygmy is open on Saturday's so I
> figured I would see if anyone around this weekend had built an Arctic Tern
> kit from Pygmy. I have finished wiring the hull together and am putting in
> the end stern frame but there is a hand written note in my instruction
> manual which say's 13" right next to the measurement typed 19"
> distance from the stern tip forward to the frame. I just wanted to double
> check real quick that 13" is infact correct as it is a VERY tight
> fit. Additionally, the frame sticks out above the shear line about
> 1", is this correct? If I am going to have to trim it prior to
> putting the deck on I would rather do it before hot glueing the frame in.

> Thanks!!

I think Pygmy is open on Saturdays this time of year. Try giving them a call. I just measured on my A.T., and the form was at 13". I don't recall mine sticking up.

Mike

Mike