Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: cloth orientation
By:Ross Leidy
Date: 7/27/1999, 9:43 am
In Response To: Re: Epoxy brand? Sys3/Tap/etc (Kara Smith)

I bought 72" 6oz cloth from Raka and layed it over the boat diagonally (like Nick shows in his book). This made the cloth drape over the stems very easily (on the bias).

It was hard to handle cloth that wide alone, but with a partner, it shouldn't be a problem. The cost was somewhere in the $5-6 range which I thought was quite good. I'd do the same thing again in a heartbeat.

Ross

> Is it better to cut it in half, or to lay out the 60" kitty-corner
> across the boat for better fiber bias? More scraps, I'd guess, but most
> could be used on high-use patches. Any ideas?

> Also, anyone used/heard of _East_ Systems Epoxy?

> Thanks again! Kara

Messages In This Thread

Epoxy brand? Sys3/Tap/etc
Kara Smith -- 7/26/1999, 6:10 pm
Re: Fabric
Paul G. Jacobson -- 7/28/1999, 11:16 pm
Re: Fabric
Will Brockman -- 7/29/1999, 7:55 am
Re: Epoxy brand? Sys3/Tap/etc
Berkeley C. -- 7/28/1999, 11:56 am
Re: Epoxy brand? Sys3/Tap/etc
Doug K. -- 7/27/1999, 6:46 pm
Re: Epoxy brand? Sys3/Tap/etc
Jim Horlacher -- 7/27/1999, 11:28 am
Re: Epoxy brand? Sys3/Tap/etc
Hank -- 7/27/1999, 8:07 am
Re: Epoxy brand? Sys3/Tap/etc
Don L -- 7/26/1999, 8:25 pm
Re: Epoxy brand? Sys3/Tap/etc
Kara Smith -- 7/27/1999, 1:13 am
Re: cloth orientation
Ed Valley -- 7/28/1999, 12:38 pm
Re: Epoxy brand? Sys3/Tap/etc
Don L -- 7/27/1999, 8:36 pm
Re: cloth orientation
Ross Leidy -- 7/27/1999, 9:43 am
Re: Epoxy brand? Sys3/Tap/etc
Dan Lindberg -- 7/26/1999, 6:45 pm