Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Scrap can be of use with clamping hatches
By:Gary Toffelmire
Date: 7/12/1999, 10:21 pm
In Response To: Scrap can be of use with clamping hatches (Paul G. Jacobson)


> If you have been extremely frugal and have very small scrap pieces they
> may slip around while you tighten the clamps. If this occurs, you can use
> a brad driven through the scrap and barely into the hatch cover to hold
> them in place. The hole from the brad can be filled in later if it should
> be noticeable.

or use a folded skap of sand paper between clamp and wood with the fold line under the clamp. Gary

>

Messages In This Thread

Something New - Hatch Covers!
John Herr -- 7/10/1999, 4:34 pm
Re: Something New - Hatch Covers!
Shawn Baker -- 7/12/1999, 11:46 am
Re: Something New - Hatch Covers!
John Herr -- 7/22/1999, 11:12 am
Re: Something New - Hatch Covers!
Jeff Warrick -- 7/10/1999, 9:32 pm
Re: Something New - Hatch Covers!
John Herr -- 7/10/1999, 9:57 pm
Scrap can be of use with clamping hatches
Paul G. Jacobson -- 7/10/1999, 10:35 pm
Re: Scrap can be of use with clamping hatches
Gary Toffelmire -- 7/12/1999, 10:21 pm
Re: Scrap can be of use with clamping hatches
John Herr -- 7/11/1999, 2:13 pm
Re: Scrap can be of use with clamping hatches
Scotty -- 7/12/1999, 8:39 am
Re: Scrap can be of use with clamping hatches
Paul G. Jacobson -- 7/11/1999, 8:18 pm
Re: Scrap can be of use with clamping hatches
John Herr -- 7/11/1999, 10:10 pm
Re: Scrap can be of use with clamping hatches
Mark Bodnar -- 7/12/1999, 10:50 pm
Re: Scrap can be of use with clamping hatches
John Herr -- 7/16/1999, 2:03 pm
Re: Scrap can be of use with clamping hatches
Mark Bodnar -- 7/16/1999, 8:35 pm
Re: Scrap can be of use with clamping hatches
John Herr -- 7/16/1999, 10:12 pm
measure the opening
Paul G. Jacobson -- 7/12/1999, 12:34 am
Re: measure the opening
John Herr -- 7/16/1999, 1:57 pm
Re: Scrap can be of use with clamping hatches
J . P. Scheib -- 7/11/1999, 3:01 am
Re: Scrap can be of use with clamping hatches
John Herr -- 7/11/1999, 2:26 pm