> Does anybody know where you can obtain okoume thinner than 3mm?

> I have been thinking about trying to fabricate some pieces (seat, etc.)
> using a cold molded process with vacuum clamping. If those pieces work
> well, I might try a whole boat. I see plenty of places that will sell you
> 3mm or 4mm marine plywood. I would think that it would be possible to
> obtain the individual veneers that are laminated together to make the
> plywood, but I don't know. Maybe the plywood is always imported in the
> laminated state.

> Also, anyone have any ideas as to whether other woods would be suitable
> for a cold molded project. Which ones, what are the considerations.

> --Will ..

Boulter plywood in Boston has 1.5 mm Okoume in their flyer and also 1/16 " aircraft plywood

addison