Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: H.I.N. question
By:Dan Lindberg
Date: 5/20/1999, 9:29 pm
In Response To: Re: H.I.N. question (Ross Leidy)

Ross has some good ideas that are worth trying.

Before you actually do it for real, try some west pieces. I have used both printers and ink pens to mark under epoxy and varnish. Both can bleed badly. On the last boat, I bought several "indelible ink" pens and made samples and applied epoxy. One bleed very bad, 1 fair and the other I used.

Again, try test pieces before you put it on your boat.

Dan

Messages In This Thread

H.I.N. question
Ed -- 5/20/1999, 12:09 pm
Re: H.I.N. question
Jamin -- 5/22/1999, 10:26 am
Re: H.I.N. question
AL BRATTON -- 5/20/1999, 10:18 pm
Re: H.I.N. question
Paul Jacobson -- 5/20/1999, 9:38 pm
Re: H.I.N. question
Shawn Baker -- 5/20/1999, 4:14 pm
Re: H.I.N. question
Ross Leidy -- 5/20/1999, 1:13 pm
Re: H.I.N. question
Stan Heeres -- 5/20/1999, 9:43 pm
Re: H.I.N. question
Dan Lindberg -- 5/20/1999, 10:28 pm
Re: H.I.N. question
Ross Leidy -- 5/21/1999, 8:34 am
Re: Thanks
Dan Lindberg -- 5/22/1999, 11:21 pm
Re: H.I.N. question
Dan Lindberg -- 5/20/1999, 9:29 pm
Re: H.I.N. question
Roger Donahe -- 5/20/1999, 4:30 pm
Re: H.I.N. question
Ross Leidy -- 5/20/1999, 9:08 pm
Re: H.I.N. question
Pete campbell -- 5/20/1999, 5:58 pm