Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Fair ?
By:jaybabina
Date: 1/19/2017, 11:56 am
In Response To: Re: Tools: Recommendations? (Steve Solomon)

"Do most people continue fairing such that all of the strips are fully rounded-over with no flat spots?"

Theoretically, yes.

A few points of fact and opinion.

Strip boats are very forgiving with fair surfaces because optically the stripes camouflage minor disturbances and the grain of the wood too. If you ever worked in a body shop or on autos or glass boats, you would be shot using a ROS fairing a curved surface. Long boards are used that flex to the curve shape. Flat painted curves show un-fairness a million times more than a stripper made of wood that's finished transparent.

2. I respect Robs opinion on finishing. People like using planes and cutting tools too for a host of reasons, one of which is no sanding dust and they produce beautiful results using those methods as well - saving sanding for the last stages. Rob I do like that expensive sander and vac you have too.

There's an old saying in the art field ... If it looks wrong it is wrong and vice versa.

My uncle was mold maker for aircraft, making wood molds of props and more. They had all kinds of pre-made sanding blocks made to the exact shape of what had to be sanded. So if you want to really obsessive over this, that's the way its done.

Messages In This Thread

Tools: Recommendations?
Patrick North -- 1/16/2017, 7:23 pm
Re: Tools: Recommendations?
Mike Bielski -- 1/16/2017, 7:48 pm
Re: Tools: Recommendations?
Mike Bielski -- 1/16/2017, 7:49 pm
Re: Tools: Recommendations?
Marc Upchurch -- 1/16/2017, 7:50 pm
Re: Tools: Recommendations?
scottbaxter -- 1/16/2017, 9:23 pm
Re: Tools: Recommendations?
Dan Caouette (CSCWC) -- 1/17/2017, 7:30 am
Surform
jaybabina -- 1/17/2017, 8:12 am
Re: Surform
Jim777 -- 1/21/2017, 6:28 am
Re: Tools: Recommendations? *PIC*
Etienne Muller -- 1/17/2017, 8:45 am
Re: Tools: Recommendations?
Nick R. -- 1/17/2017, 9:38 am
Re: Tools: Recommendations?
Rich D -- 1/17/2017, 9:42 am
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/17/2017, 10:55 am
Re: Tools: Recommendations?
Patrick North -- 1/18/2017, 9:42 am
Re: Tools: Recommendations?
Steve Solomon -- 1/18/2017, 12:32 pm
Re: Tools: Recommendations?
Patrick North -- 1/18/2017, 12:56 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/18/2017, 1:38 pm
Re: Tools: Recommendations?
Marc Upchurch -- 1/18/2017, 3:47 pm
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/18/2017, 1:44 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 10:26 am
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/19/2017, 11:54 am
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 12:23 pm
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/19/2017, 1:06 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 2:08 pm
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/19/2017, 3:22 pm
Re: Tools: Recommendations?
Etienne Muller -- 1/19/2017, 4:42 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 5:22 pm
Re: Tools: Recommendations?
Marc Upchurch -- 1/19/2017, 5:42 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 6:01 pm
Re: Tools: Recommendations?
Etienne Muller -- 1/19/2017, 6:09 pm
Re: Tools: Recommendations?
Steve Solomon -- 1/19/2017, 6:42 pm
Re: Tools: Recommendations?
Justin -- 1/20/2017, 5:25 am
Re: Tools: Recommendations?
Steve Solomon -- 1/20/2017, 6:45 am
Re: Tools: Recommendations?
Rob Macks/Laughing Loon CC&K -- 1/20/2017, 8:57 am
Re: Tools: Recommendations?
Etienne Muller -- 1/20/2017, 3:10 pm
Re: Tools: Recommendations?
Bob Ten Eyck -- 1/22/2017, 12:13 pm
Fair ?
jaybabina -- 1/19/2017, 11:56 am
Re: Fair ?
Patrick North -- 1/19/2017, 12:20 pm
Re: Fair ?
Steve Solomon -- 1/19/2017, 12:39 pm
Re: Fair ?
scottbaxter -- 1/19/2017, 4:28 pm
Re: Fair ?
Steve Solomon -- 1/19/2017, 5:43 pm
Re: Fair ?
Bill Hamm -- 1/20/2017, 12:08 am
Re: Fair ?
Steve Solomon -- 1/20/2017, 6:37 am
Re: Fair ?
Dan Caouette (CSCWC) -- 1/19/2017, 5:10 pm
Re: Fair ?
Marc Upchurch -- 1/19/2017, 5:45 pm
Re: Fair ?
Mike Bielski -- 1/19/2017, 10:45 pm
Re: Tools: ROS and neighbours
Ian Johnson -- 1/22/2017, 9:32 pm
Re: Tools: ROS and neighbours
anewhouse -- 1/22/2017, 10:19 pm
Fair
Les Cheeseman -- 1/29/2017, 10:40 am