Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Stripping the wood

By:Justin
Date: 2/28/2014, 9:42 am

In Response To: Strip: Stripping the wood (mark C)

I understand I need to cut the 30cm strip into smaller widths however how do I reduce the wood thickness from 19mm to say 6 mm

The 19mm thickness becomes the width of your 6mm thick strips.

i.e. you place your board flat on the saw and cut 6mm (actually 5mm is also plenty) wide slices off it - and end up with 19mm x 6mm strips.

Simple, really,

Justin

Strip: Stripping the wood
mark C -- 2/27/2014, 10:34 pm

Re: Strip: Stripping the wood
Rod Tait -- 2/27/2014, 11:43 pm

Re: Strip: Stripping the wood *NM*
ancient kayaker -- 2/27/2014, 11:46 pm

Re: Strip: Stripping the wood
Justin -- 2/28/2014, 9:42 am

Re: Strip: Stripping the wood
Olli -- 2/28/2014, 11:27 am

Re: Strip: Stripping the wood
mark C -- 2/28/2014, 7:03 pm

Re: Strip: Stripping the wood
Nick Riccardi -- 2/28/2014, 7:26 pm

Re: Strip: Stripping the wood
mark C -- 2/28/2014, 7:38 pm

Re: Strip: Stripping the wood
ancient kayaker -- 3/1/2014, 12:11 am

Re: Strip: Stripping the wood
ancient kayaker -- 3/1/2014, 9:50 am

Re: Strip: Stripping the wood *PIC*
Greg Galloway -- 3/1/2014, 11:41 am

Re: Strip: Stripping the wood
Jack Hawkins -- 3/1/2014, 9:28 am

Re: Strip: Stripping the wood *PIC*
Etienne Muller -- 3/1/2014, 3:55 am

Re: Strip: Stripping the wood
Marc Upchurch -- 3/1/2014, 8:59 am

Re: Strip: Stripping the wood *PIC*
Rob Macks/Laughing Loon CC&K -- 3/1/2014, 9:13 am

Re: Strip: Stripping the wood
george jung -- 3/1/2014, 8:54 pm

Re: Strip: Stripping the wood *PIC*
Etienne Muller -- 3/2/2014, 11:05 am

Re: Strip: Stripping the wood
Bill Hamm -- 3/3/2014, 1:13 am

Re: Strip: Stripping the wood
Etienne Muller -- 3/3/2014, 3:42 am

Re: Strip: Stripping the wood
ancient kayaker -- 3/7/2014, 11:41 pm

Re: Strip: Stripping the wood
Bill Hamm -- 3/9/2014, 12:50 am

KayakForum.com