Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Sanding Epoxy. What Grit?
By:Bill Hamm
Date: 6/2/2013, 12:47 am
In Response To: Re: Strip: Sanding Epoxy. What Grit? (Etienne Muller)

Extra coats of varnish weight nearly nothing, much like wax, varnish on - varnish off, the reason is to fill the surface to get it completely smooth, so most of the excess is sanded off, each coat getting a little smoother. It is expensive though, sorta, takes perhaps a pint to varnish a kayak per coat.

Bill H.

Messages In This Thread

Strip: Sanding Epoxy. What Grit?
Mike -- 5/28/2013, 10:52 pm
Re: Strip: Sanding Epoxy. What Grit? *PIC*
robert l -- 5/29/2013, 12:53 am
Re: Strip: Sanding Epoxy. What Grit?
Matt Jakubek -- 5/29/2013, 9:44 am
Re: Strip: Sanding Epoxy. What Grit?
JohnAbercrombie -- 5/29/2013, 12:06 pm
Re: Strip: Sanding Epoxy. What Grit?
Rob Macks/Laughing Loon CC&K -- 5/29/2013, 2:56 pm
Re: Strip: Sanding Epoxy. What Grit?
Etienne Muller -- 5/29/2013, 8:13 pm
Re: Strip: Sanding Epoxy. What Grit?
Rob Macks/Laughing Loon CC&K -- 5/29/2013, 9:06 pm
Re: Strip: Sanding Epoxy. What Grit?
Mike -- 5/29/2013, 10:29 pm
Re: Strip: Sanding Epoxy. What Grit?
Bill Hamm -- 5/30/2013, 1:55 am
Re: Strip: Sanding Epoxy. What Grit?
Etienne Muller -- 5/30/2013, 3:41 am
Re: Strip: Sanding Epoxy. What Grit?
Paul Davies -- 5/30/2013, 2:05 pm
Re: Strip: Sanding Epoxy. What Grit?
Jennifer Harold -- 5/30/2013, 9:54 pm
Re: Strip: Sanding Epoxy. What Grit?
JohnAbercrombie -- 5/30/2013, 3:58 pm
Re: Strip: Sanding Epoxy. What Grit?
Nick Riccardi -- 5/30/2013, 4:35 pm
Re: Strip: Sanding Epoxy. What Grit?
Etienne Muller -- 5/30/2013, 5:51 pm
Re: Strip: Sanding Epoxy. What Grit?
Jennifer Harold -- 5/30/2013, 9:57 pm
Re: Strip: Sanding Epoxy. What Grit?
Robert l -- 5/30/2013, 10:59 pm
Re: Strip: Sanding Epoxy. What Grit?
Allan -- 5/31/2013, 2:43 am
Why to not do a seal coat
Jay Babina -- 5/31/2013, 7:12 am
Re: Strip: Sanding Epoxy. What Grit?
Rob Macks/Laughing Loon CC&K -- 6/1/2013, 11:21 am
Re: Strip: Sanding Epoxy. What Grit?
Bill Hamm -- 6/2/2013, 12:43 am
Re: Strip: Sanding Epoxy. What Grit?
Jennifer Harold -- 5/31/2013, 3:11 am
Re: Strip: Sanding Epoxy. What Grit?
Allan -- 5/31/2013, 3:18 am
Re: Strip: Sanding Epoxy. What Grit?
Etienne Muller -- 5/31/2013, 4:55 am
Re: Strip: Sanding Epoxy. What Grit?
Bill Hamm -- 6/2/2013, 12:47 am
Re: Strip: Sanding Epoxy. What Grit?
Etienne Muller -- 6/2/2013, 4:53 am
Re: Strip: Sanding Epoxy. What Grit?
Justin -- 6/2/2013, 6:18 am
How much varnish?!?!
Dan Caouette (CSCWC) -- 6/3/2013, 9:34 am
Re: How much varnish?!?!
Justin -- 6/4/2013, 2:50 am
Re: How much varnish?!?!
Etienne Muller -- 6/4/2013, 3:10 am
Re: How much varnish?!?!
Dan Caouette (CSCWC) -- 6/4/2013, 8:43 am
Re: How much varnish?!?!
Justin -- 6/4/2013, 8:46 am
Re: Strip: Sanding Epoxy. What Grit?
john vanburen -- 5/31/2013, 9:11 am
Re: Strip: Sanding Epoxy. What Grit?
Etienne Muller -- 5/31/2013, 9:20 am