Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Ripping strips with a plunge cut saw
By:Matt Jakubek
Date: 4/12/2013, 9:56 am
In Response To: Strip: Ripping strips with a plunge cut saw *PIC* (Matt Jakubek)

Here's another benefit of this construction I forgot to mention: when attached to the shopvac/dust deputy, the whole process is almost dust free – only a little blow at the end of each strip when the blade exits. I built a little catch fence at the end and that solved the issue.

Messages In This Thread

Strip: Ripping strips with a plunge cut saw *PIC*
Matt Jakubek -- 4/11/2013, 12:24 pm
Re: Strip: Ripping strips with a plunge cut saw
dave koslow -- 4/11/2013, 3:07 pm
Re: Strip: Ripping strips with a plunge cut saw
Daniel Thaler -- 4/11/2013, 6:01 pm
Re: Strip: Ripping strips with a plunge cut saw
Matt Jakubek -- 4/12/2013, 9:52 am
Re: Strip: Ripping strips with a plunge cut saw
Matt Jakubek -- 4/12/2013, 9:56 am
Re: Strip: Ripping strips with a plunge cut saw
Malcolm Schweizer -- 4/12/2013, 1:14 pm
Re: Strip: Ripping strips with a plunge cut saw *PIC*
Etienne Muller -- 4/12/2013, 2:29 pm
Re: Strip: Ripping strips with a plunge cut saw
Matt Jakubek -- 4/12/2013, 5:59 pm
Re: Strip: Ripping strips with a plunge cut saw
Bill Hamm -- 4/14/2013, 1:29 am
Re: Strip: Ripping strips with a plunge cut saw
Bill Hamm -- 4/15/2013, 2:15 am
Re: Strip: Ripping strips with a plunge cut saw
ddaniels -- 4/14/2013, 10:33 am
Re: Strip: Ripping strips with a plunge cut saw
ancient kayaker -- 4/14/2013, 11:38 am