Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Webbing loops - cutting the slots
By:Ian Johnson
Date: 11/15/2010, 9:53 pm

: I make a wider and a little longer slot, fill with graphite filled
: epoxy so it's black then after it's set drill a hole the width
: of the new slot sized to fit the webbing doubled at each end of
: the slot and cut out the middle with a sabre saw with a scroll
: blade that's very skinny.

: You need to goop up the base for the webbing loops when they are
: fitted into the slots to seal the holes. Works for me.

: Bill H.

Thanks

Maybe I should get myself a sabre saw. I presume you end up with slots a lot thinner than 3/32.

What do you goop up the base of the webbing loops with?

Messages In This Thread

Strip: Webbing loops - cutting the slots
Ian Johnson -- 11/15/2010, 9:05 pm
Re: Strip: Webbing loops - cutting the slots
Paul Rummler -- 11/16/2010, 12:02 am
Re: Strip: Webbing loops - cutting the slots *PIC*
Bob Beaullieu -- 11/16/2010, 5:16 am
Re: Strip: Webbing loops - cutting the slots *PIC*
Bob Beaullieu -- 11/16/2010, 5:17 am
Re: Strip: Webbing loops - cutting the slots *PIC*
Bob Beaullieu -- 11/16/2010, 5:19 am
Re: Strip: Webbing loops - cutting the slots
george jung -- 11/17/2010, 5:46 pm
Re: Strip: Webbing loops - cutting the slots *PIC*
Dan Caouette (CSFW) -- 11/17/2010, 6:20 pm
Re: Strip: Webbing loops - cutting the slots
wwfloyd -- 11/18/2010, 8:32 am
Re: Strip: Webbing loops - cutting the slots *PIC*
Dan Caouette (CSFW) -- 11/18/2010, 8:56 am
Re: Strip: Webbing loops - cutting the slots
Bill Hamm -- 11/19/2010, 1:01 am
Re: Strip: Webbing loops - cutting the slots *PIC*
Dan Caouette (CSFW) -- 11/19/2010, 8:19 am
Re: Strip: Webbing loops - cutting the slots
Bill Hamm -- 11/19/2010, 2:59 pm
Re: Strip: Webbing loops - cutting the slots
Ric -- 11/18/2010, 7:27 pm
Re: Strip: Webbing loops - cutting the slots
wwfloyd -- 11/18/2010, 9:06 am
Deckline...
Dan Caouette (CSFW) -- 11/18/2010, 9:36 am
Re: Deckline...
Simeon -- 11/18/2010, 8:59 pm
Re: Deckline...
Bill Hamm -- 11/19/2010, 12:57 am
Re: Deckline...
Dan Caouette (CSFW) -- 11/19/2010, 8:21 am
Re: Deckline...
Chris Richer -- 11/19/2010, 12:23 pm
Re: Deckline...
Mike Savage -- 11/18/2010, 1:51 pm
Re: Deckline...
wwfloyd -- 11/18/2010, 10:07 am
Re: Strip: Webbing loops - cutting the slots
Farback -- 11/17/2010, 7:52 pm
Re: Strip: Webbing loops - cutting the slots
Bill Hamm -- 11/18/2010, 1:33 am
Re: Strip: Webbing loops - cutting the slots
Dan Caouette (CSFW) -- 11/18/2010, 8:57 am
Re: Strip: Webbing loops - cutting the slots
Bill Hamm -- 11/18/2010, 1:37 pm
Re: Strip: Webbing loops - cutting the slots *PIC*
Kurt Maurer -- 11/15/2010, 10:17 pm
Re: Strip: Webbing loops - cutting the slots
Ian Johnson -- 11/17/2010, 4:38 am
Re: Strip: Webbing loops - cutting the slots
Bill Hamm -- 11/18/2010, 1:31 am
Re: Strip: Webbing loops - leave it complicated!
Greg H -- 11/16/2010, 9:58 pm
Re: Strip: Webbing loops - leave it complicated!
Bill Hamm -- 11/16/2010, 10:30 pm
Re: Strip: Webbing loops - cutting the slots
Kurt Maurer -- 11/15/2010, 10:19 pm
Re: Strip: Webbing loops - cutting the slots
Bill Hamm -- 11/15/2010, 9:48 pm
Re: Strip: Webbing loops - cutting the slots
Ian Johnson -- 11/15/2010, 9:53 pm
Re: Strip: Webbing loops - cutting the slots
Bill Hamm -- 11/15/2010, 9:55 pm