Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: waterproof hatches *PIC*
By:Etienne Muller
Date: 10/24/2010, 5:05 am
In Response To: Strip: waterproof hatches (george jung)

Hi George

I cut out my hatch holes after joining the deck to the hull, glassing, sanding. etc.

Then I laminate up the hatch lips in place, remove and clean them up, then glue them in.

I just use draught excluder rubbers from the local hardware store as seals.

I find that as the day cools I can get a vacuum forming and have to pry the hatch off it is sealed so well.

Probably a function of cutting the hatches after all the glassing has had time to go off and the boat is totally stiffened.

The pics in the following posts are the process

http://etiennemuller.com for more.

All the best

Et

Messages In This Thread

Strip: waterproof hatches
george jung -- 10/23/2010, 8:59 am
Re: Strip: waterproof hatches *PIC*
Kurt Maurer -- 10/25/2010, 8:33 pm
Re: Strip: waterproof hatches
george jung -- 10/25/2010, 10:59 pm
Re: Strip: waterproof hatches
Bill Hamm -- 10/26/2010, 8:48 am
Re: Strip: waterproof hatches
Bill Hamm -- 10/26/2010, 8:50 am
Re: Strip: waterproof hatches
Kurt Maurer -- 10/25/2010, 11:18 pm
Re: Strip: waterproof hatches
Don Goss -- 10/24/2010, 9:40 am
Re: Strip: waterproof hatches
Scott Fitzgerrell -- 10/24/2010, 7:34 pm
Re: Strip: waterproof hatches
Don Goss -- 10/24/2010, 9:17 pm
Re: Strip: waterproof hatches
george jung -- 10/25/2010, 12:09 am
Re: Strip: waterproof hatches
Bill Hamm -- 10/25/2010, 2:59 pm
Re: Strip: waterproof hatches
Dan Caouette (CSFW) -- 10/25/2010, 3:09 pm
Re: Strip: waterproof hatches
Bill Hamm -- 10/25/2010, 6:15 pm
Re: Strip: waterproof hatches *PIC*
Etienne Muller -- 10/24/2010, 5:05 am
Re: Strip: waterproof hatches *NM* *PIC*
Etienne Muller -- 10/24/2010, 5:07 am
Re: Strip: waterproof hatches *PIC*
Etienne Muller -- 10/24/2010, 5:09 am
Re: Strip: waterproof hatches *NM* *PIC*
Etienne Muller -- 10/24/2010, 5:11 am
Re: Strip: waterproof hatches *PIC*
Etienne Muller -- 10/24/2010, 5:12 am
Re: Strip: waterproof hatches *PIC*
Etienne Muller -- 10/24/2010, 5:13 am
Re: Strip: waterproof hatches
Bill Hamm -- 10/24/2010, 12:16 am
Re: Strip: waterproof hatches
Mark Rakestraw -- 10/23/2010, 4:30 pm
Re: Strip: waterproof hatches
george jung -- 10/23/2010, 5:00 pm