Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Squeegee
By:Mike Bielski
Date: 7/5/2010, 1:22 am
In Response To: Squeegee (Jay Babina )

: I use a squeegee that's soft plastic with a very thin edge that you
: can get at automotive supply houses etc.

I have found that there is a HUGE difference in quality between squeegees. They are not all the same- and they are most definitely a tool. I have found the difference between the genuine 3M squeegees and everything else is quite substantial. I actually love the 3M- it makes the job so much easier.

I used the Ted Moores brush technique as it's detailed in Gougeon Brothers Epoxy Works issue 16 on their web site, and I found it was pretty wasteful of materials, and I can't see that it did a better job than using a squeegee would. The nice thing about it, though, you really get a good feel for when the cloth is stuck down bubble-free. If you clip the hairs on the brush short enough it really does a great "search and destroy" on any bubbles. Can't say I'd use this technique again, though, especially now that I have a great set of squeegees that I love.

m

Messages In This Thread

Epoxy: Roll or Squeegee?
Malcolm Schweizer -- 7/4/2010, 8:01 am
Re: Epoxy: Roll or Squeegee?
Mike Hanks -- 7/8/2010, 2:52 am
Re: Epoxy: Roll or Squeegee?
Robert N Pruden -- 7/6/2010, 10:39 pm
Re: Epoxy: Roll or Squeegee?
Don Goss -- 7/5/2010, 8:47 am
Re: Epoxy: Roll or Squeegee?
Kurt Maurer -- 7/5/2010, 10:29 am
Re: Epoxy: Roll or Squeegee?
george jung -- 7/5/2010, 11:22 pm
Re: Epoxy: Roll or Squeegee?
Malcolm Schweizer -- 7/5/2010, 11:44 am
Re: Epoxy: Roll or Squeegee?
Bill Hamm -- 7/5/2010, 12:15 am
Re: Epoxy: Roll or Squeegee?
Malcolm Schweizer -- 7/5/2010, 3:58 am
Re: Epoxy: Roll or Squeegee?
Bill Hamm -- 7/6/2010, 7:28 am
Squeegee
Jay Babina -- 7/4/2010, 6:37 pm
Re: Squeegee
Malcolm Schweizer -- 7/5/2010, 4:12 am
Re: Squeegee
Jay Babina -- 7/5/2010, 9:24 am
Re: Squeegee
Malcolm Schweizer -- 7/5/2010, 11:53 am
Re: Squeegee
Mike Bielski -- 7/5/2010, 10:38 am
Re: Squeegee
Jay Babina -- 7/6/2010, 7:09 am
Re: Squeegee
Bill Hamm -- 7/6/2010, 2:37 pm
Re: Squeegee
Dan Caouette (CSFW) -- 7/6/2010, 5:29 pm
Re: Squeegee
Bill Hamm -- 7/7/2010, 7:06 am
Re: Squeegee
Fred -- 7/6/2010, 8:34 am
Re: Squeegee
Mike Bielski -- 7/5/2010, 1:22 am
Re: Squeegee
Paul G. Jacobson -- 7/11/2010, 12:26 am
Re: Squeegee
Bill Hamm -- 7/11/2010, 12:35 am
Re: Squeegee
Nick Schade - Guillemot Kayaks -- 7/5/2010, 8:39 am
Re: Epoxy: Roll or Squeegee?
Etienne Muller -- 7/4/2010, 2:01 pm
Re: Epoxy: Roll or Squeegee?
Wesley Ewell -- 7/4/2010, 9:36 am
Re: Epoxy: Roll or Squeegee?
wwfloyd -- 7/4/2010, 8:34 am
Re: Epoxy: Roll or Squeegee?
Rob Macks / Laughing Loon CC&K -- 7/4/2010, 8:13 am