Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: sealing stitch through holes on
By:Scott Shurlow
Date: 8/23/2009, 9:55 pm
In Response To: Re: Skin-on-Frame: sealing stitch through holes on (wwfloyd)

: As noted in my other reply, this sounds good. But, I still wonder how to seal
: the inside of those many small stitch holes through the base ring. It's
: not like a 1/4 inch deck fitting hole that you can swab epoxy through, or
: fill-drill-fill.
The holes do not need to be filled. When you coat the skin, the poly will fill them in.
Scott

Messages In This Thread

Skin-on-Frame: sealing stitch through holes on combing
wwfloyd -- 8/23/2009, 10:09 am
Re: Skin-on-Frame: sealing stitch through holes on
Aaron H -- 8/24/2009, 9:54 am
Re: Skin-on-Frame: Scott, Brian, Aaron
wwfloyd -- 8/24/2009, 5:47 pm
Re: Skin-on-Frame: Scott, Brian, Aaron
Brian Scarborough -- 8/26/2009, 5:21 pm
Re: Skin-on-Frame: Scott, Brian, Aaron
Kudzu -- 8/24/2009, 10:24 pm
Re: Skin-on-Frame: Scott, Brian, Aaron
wwfloyd -- 8/24/2009, 10:34 pm
Re: Skin-on-Frame: Scott, Brian, Aaron
Dave Gentry -- 8/24/2009, 6:24 pm
It's very simple
Brian Nystrom -- 8/24/2009, 8:26 am
Re: Skin-on-Frame: sealing stitch through holes on
Dave Gentry -- 8/23/2009, 4:46 pm
Re: Skin-on-Frame: sealing stitch through holes on
wwfloyd -- 8/23/2009, 5:45 pm
Re: Skin-on-Frame: sealing stitch through holes on
Scott Shurlow -- 8/23/2009, 9:55 pm
Re: Skin-on-Frame: sealing stitch through holes on
wwfloyd -- 8/23/2009, 5:16 pm