Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: varnish questions
By:Scott Fitzgerrell
Date: 5/16/2009, 5:32 pm
In Response To: Epoxy: varnish questions (Joe Wuts)

: I am putting the finishing touches on a Return and had a question on the
: finish. I sanded the taped edges to feather them down which cuts into the
: glass of course so do i need to apply another coat of epoxy to this or can
: I just varnish it? If so if I use U.S. Composites fast hardner to do this
: how long do I wait to varnish Assuming a temperature of 60 degrees. Thanks
: for any advice Joe

Search this board for Rob Macks' varnishing instructions. He's posted it several times. Excellent method that works without fuss or flaw.

2c

--Scott

Messages In This Thread

Epoxy: varnish questions
Joe Wuts -- 5/14/2009, 12:23 pm
Re: Epoxy: varnish questions
Scott Fitzgerrell -- 5/16/2009, 5:32 pm
Re: Epoxy: varnish questions
Paul G. Jacobson -- 5/16/2009, 1:28 pm
Re: Epoxy: varnish questions
JohnK -- 5/14/2009, 7:27 pm