Date: 5/15/2009, 10:46 am
Here is the link to Pavia Lumholt's website on installing bulkheads into a SOF kayak. I'm sure you'll be able to adapt this to a Yostie PVC skin. I would glue the PVC bulkhead to the PVC skin with the same nasty glue that Tom recommends, and then probably Aquaseal the PVC bulkhead to the stringers. (I have no idea what that red goop is he's using to seal up the bulkheads.)
Or, I'd just look through back issues of the Masik from QajaqUSA and make a sea sock.
Although, de-watering a SOF in waist deep water when learning to roll isn't that big a deal, so I'd probably skip the sea sock unless paddling in rougher stuff. Sea socks + float bags seem to be the rough condition consensus over on QajaqUSA's forums.
Brian
: Hi,
: I am almost to the point of putting the deck on my first SOF boat (Tom's Sea
: Cruiser, wood frame). So about time to look at floatation bags or
: something for bouyancy, as I'll be using this boat to learn to roll.
: I saw somewhere (pic here or another site or somewhere) that someone had made
: permanent bulkheads for their SOF boat - but can't find it now. I was
: thinking of doing this to minimise water entry. My idea is to silicone PVC
: to a bulkhead, with flaps glued to the skin and extra strips and silicone
: around the stringer points. Has anyone tried this, or have an idea if it
: would work (i.e. provide a watertight bulkhead).
: Alternatively, would a sea sock type arrangement be better? doe sanyone have
: any links or ideas on how to make one at home - i.e. material to use,
: attaching to cockpit rim (so it's removable ideally).
: Thanks,
: Darren
: Melbourne, Australia
Messages In This Thread
- Skin-on-Frame: Bulkheads or sea sock
Darren -- 5/10/2009, 12:21 am- Re: Skin-on-Frame: forget about bulkheads
Paul G. Jacobson -- 5/17/2009, 10:58 pm- Re: Skin-on-Frame: forget about bulkheads
Darren -- 5/19/2009, 12:45 am
- Re: Skin-on-Frame: Bulkheads or sea sock *LINK*
Brian Scaborough -- 5/15/2009, 10:46 am- Re: Skin-on-Frame: Bulkheads or sea sock *LINK*
Dave Gentry -- 5/10/2009, 5:21 pm - Re: Skin-on-Frame: forget about bulkheads
- Re: Skin-on-Frame: forget about bulkheads