Steve,
I read a post on this board that said as long as you can indent the epoxy layer you are applying over with a thumbnail you are OK to recoat without sanding. I did my recoats as soon as the previous coat was cured enough to recoat over so I am not speaking form experience. I would be very cautious about blush on the surface. If there is any doubt I would want to err on the side of caution, and sand. A call to the supplier of your brand of epoxy might be time well spent.
Carry on!!
Ken
: What would be the longest period of time between seal coat and glass wetout,
: without aditional prep? If I wait three or four days to glass, will I have
: to sand?
: Thanx everyone, for the great help y'all have been with my two boats. What a
: GREAT group!!
: Steve
Messages In This Thread
- S&G: Explorer Progress *LINK* *Pic*
Steve Frederick -- 2/23/2003, 5:51 pm- Re: S&G: Another Question
Steve Frederick -- 2/24/2003, 9:22 pm- Re: S&G: Another Question
Ken Sutherland -- 3/2/2003, 4:07 pm- Re: S&G: Another Question
Steve Frederick -- 3/2/2003, 7:13 pm
- Re: S&G: Another Question
- Re: S&G: Explorer Progress
srchr/gerald -- 2/24/2003, 5:26 pm - Re: S&G: Another Question
- Re: S&G: Another Question