Date: 2/23/2003, 5:51 pm
Hello all,
Finished the deck recess and a seal coat on the deck this weekend. I had a lot of grain runout that I could have avoided, had I looked the scource plank over better. The strips were very brittle, don't know why, some areas cracked, chipped away when faired/sanded, don't know why,(runout?)
Well, it looks ok now, after filling the cracks, and seal coat.
Considering an "onlay". Should I apply now, or can I put it over the glass, under a small piece of glass later. The reason I pose the question is that the "onlay" is not ready, and it could be a few days 'till I get it ready.
Could I just wait for the 'glass till then? What will I have to do to ready the sealcoat for glass after a few days? I'm using Raka 127/350.
Thanx in advance, Steve
Messages In This Thread
- S&G: Explorer Progress *LINK* *Pic*
Steve Frederick -- 2/23/2003, 5:51 pm- Re: S&G: Another Question
Steve Frederick -- 2/24/2003, 9:22 pm- Re: S&G: Another Question
Ken Sutherland -- 3/2/2003, 4:07 pm- Re: S&G: Another Question
Steve Frederick -- 3/2/2003, 7:13 pm
- Re: S&G: Another Question
- Re: S&G: Explorer Progress
srchr/gerald -- 2/24/2003, 5:26 pm - Re: S&G: Another Question
- Re: S&G: Another Question