: There's been a lot of activity building models lately - to fuel the fire,
: here's a photo of my first stab at a model. It's been a fun experience so
: far, but I really wish I had 1/4 sized tools and 1/4 sized hands. I'm
: planning to make strips by taking some existing 1/4" x 3/4"
: strips, and run them through the tablesaw to get a 1/8" x 1/4"
: in strips. It's going to be like trying to make matchsticks, but hopefully
: I'll be able to get some usable strips that way.
: There's a couple more setup photos on my website. Follow the link and then
: click on the "Scale Model" in the table of contents.
: Ross
: ps. It feels good to be building a kayak again, even if it is in miniature.

Too Cool Ross,
You've definately bit off more than I can chew, although a strip built at model scale will certainly be my first strip built. It's tough working in small size, but it's nice to be able to wrap masking tape around the whole deal without going thru rolls of the stuff. Good luck to you on your stripping, can't wait to see your progress.
SMF