Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: makes no sense
By:Bill Hamm
Date: 10/11/2007, 2:48 am
In Response To: Re: makes no sense (HenkA)

: Would you care to share your knowledge with the rest of us? I am certainly
: interested in quantitative comparisons between strip and S&G obtained by
: experiments, if possible.

: Henk

There is some lengthwise strength imparted by the filets, without a glass cover not much. Most comes from the ply itself, generally a pretty nice material. One thing to remember though is it's got equal strength in all directions which means that unlike cedar strips you can't orient it to the loads so you're wasting some of the strength in directions not needed.

The lengthwise strength of a strip boat comes from the strips running lengthwise. The sideways forces have to be absorbed by the glass, which it's good at.

Not saying one building method is better than another, both have strengths and weaknesses. Much harder to make a round bottom boat from plywood though, can be done but not in sheets in hulls with any reasonable amount of curvature.

Bill H.

Messages In This Thread

S&G: S & G less durable than strip-built
john faas -- 10/3/2007, 1:58 pm
makes no sense
LeeG -- 10/9/2007, 8:20 am
Re: makes no sense
HenkA -- 10/9/2007, 10:47 pm
Yes, I'd trust a boat with NO inside glass
Paul G. Jacobson -- 10/11/2007, 1:01 pm
Re: Yes, I'd trust a boat with NO inside glass
Bryan Hansel -- 10/11/2007, 7:18 pm
Re: Yes, I'd trust a boat with NO inside glass
Bill Hamm -- 10/11/2007, 8:00 pm
Re: Yes, I'd trust a boat with NO inside glass *LINK* *Pic*
Dan Caouette (CSFW) -- 10/12/2007, 8:02 am
Re: Yes, I'd trust a boat with NO inside glass
Bill Hamm -- 10/12/2007, 8:17 am
I'd like a side of ribs with a glass of resin
Paul G. Jacobson -- 10/12/2007, 11:05 am
Re: I'd like a side of ribs with a glass of resin
Bill Hamm -- 10/12/2007, 3:52 pm
Re: I'd like a side of ribs with a glass of resin
Mike Savage -- 10/12/2007, 2:04 pm
Re: I'd like a side of ribs with a glass of resin
Dan Caouette (CSFW) -- 10/12/2007, 11:25 am
Re: I'd like a side of ribs with a glass of resin
Paul G. Jacobson -- 10/12/2007, 11:57 am
Re: I'd like a side of ribs with a glass of resin
Dan Caouette (CSFW) -- 10/12/2007, 12:18 pm
Re: Yes, I'd trust a boat with NO inside glass
Dan Caouette (CSFW) -- 10/12/2007, 10:36 am
fix up your Pal
Paul G. Jacobson -- 10/12/2007, 11:47 am
Re: fix up your Pal
Dan Caouette (CSFW) -- 10/12/2007, 12:16 pm
Re: fix up your Pal
Bill Hamm -- 10/12/2007, 3:46 pm
Re: fix up your Pal
Dan Caouette (CSFW) -- 10/14/2007, 8:19 am
Re: fix up your Pal
Paul G. Jacobson -- 10/12/2007, 1:04 pm
Re: Yes, I'd trust a boat with NO inside glass
TOM RAYMOND -- 10/11/2007, 6:00 pm
Re: Yes, I'd trust a boat with NO inside glass
Bill Hamm -- 10/11/2007, 5:02 pm
Re: Yes, I'd trust a boat with NO inside glass
John Monroe -- 10/13/2007, 6:38 am
Re: Yes, I'd trust a boat with NO inside glass
Bill Hamm -- 10/13/2007, 7:17 am
Re: Yes, I'd trust a boat with NO inside glass
Paul G. Jacobson -- 10/11/2007, 6:48 pm
Re: Yes, I'd trust a boat with NO inside glass
Bill Hamm -- 10/11/2007, 7:58 pm
Re: makes no sense
Bryan Hansel -- 10/10/2007, 12:32 pm
Re: makes no sense
Robert N Pruden -- 10/10/2007, 8:12 pm
Re: makes no sense
TOM RAYMOND -- 10/11/2007, 11:41 am
Re: makes no sense
Bill Hamm -- 10/11/2007, 2:51 am
re. ten pounds less
LeeG -- 10/10/2007, 12:55 pm
Re: makes no sense
Bill Hamm -- 10/10/2007, 1:38 am
Re: makes no sense
HenkA -- 10/10/2007, 10:39 pm
Re: makes no sense
Bill Hamm -- 10/11/2007, 2:48 am
Re: makes no sense
HenkA -- 10/11/2007, 3:46 pm
Re: makes no sense
Bill Hamm -- 10/11/2007, 2:49 am
Re: S&G: S & G less durable than strip-built
HenkA -- 10/4/2007, 8:25 pm
Re: S&G: S & G less durable than strip-built
HenkA -- 10/4/2007, 10:44 pm
Re: S&G: (Link to thread: Which gives stronger boa *LINK*
HenkA -- 10/4/2007, 10:34 pm
Re: S&G: (Link to thread: try again *LINK*
HenkA -- 10/4/2007, 10:55 pm
Two links to tests of strip & S&G
Glen Smith -- 10/4/2007, 8:54 pm
Re: Two links to tests of strip & S&G
Robert N Pruden -- 10/4/2007, 9:58 pm
Re: S&G: S & G less durable than strip-built
Bill Hamm -- 10/4/2007, 1:30 am
Re: S&G: S & G less durable than strip-built
vk1nf -- 10/3/2007, 9:44 pm
Re: S&G: S & G less durable than strip-built
Aaron -- 10/3/2007, 8:41 pm
Re: S&G: S & G less durable than strip-built
Scott Baxter -- 10/3/2007, 7:49 pm
Disagree!
Robert N Pruden -- 10/3/2007, 6:43 pm
Re: S&G: S & G less durable than strip-built
Charlie -- 10/3/2007, 5:39 pm
Re: S&G: S & G less durable than strip-built
Paul G. Jacobson -- 10/3/2007, 2:44 pm
Re: S&G: S & G less durable than strip-built
Robert N Pruden -- 10/3/2007, 6:49 pm
durability not the issue. Think "ability" instead
Paul G. Jacobson -- 10/4/2007, 9:12 am
Re: durability not the issue. Think "ability" inst
Robert N Pruden -- 10/4/2007, 6:30 pm
Only one job? You'll go mad!!! *NM*
TOM RAYMOND -- 10/4/2007, 6:47 pm
Robert is gonna start writing his books
Robert N Pruden -- 10/4/2007, 7:06 pm
Re: Robert is gonna start writing his books
Ken Sutheland -- 10/6/2007, 6:24 pm
Re: S&G: S & G less durable than strip-built
Bryan Hansel -- 10/3/2007, 2:17 pm