Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: glass as scrapers
By:Shawn Baker
Date: 9/24/2001, 5:56 pm
In Response To: Re: glass as scrapers (mike arnopol)

: Hi Chip

: Yeah, ebony is as hard as it gets, but this is a technique that you obviously
: wear gloves, and the object is not bearing down hard. I'm getting ready to
: start my first kayak. I just thought it might be good to take the angle
: edges on the outer strips down, or scraping the glue on the inside.

I've used glass to scrape and fair leather objects. (learned this from a master leather carver). Definitely wear leather gloves...hmm..leather...make sure you don't slide the cut glass edge across your leather gloves, or it'll cut just as easily as your leather/wood piece!!

Shawn

Messages In This Thread

glass as scrapers
mike arnopol -- 9/24/2001, 1:39 pm
Re: glass as scrapers
Scott E. Davis -- 9/25/2001, 1:31 pm
Re: glass as scrapers
Dick Lemke -- 9/27/2001, 11:55 pm
Re: glass as scrapers
Roy Morford -- 9/28/2001, 10:45 am
Re: glass as scrapers
Dick Lemke -- 10/3/2001, 11:33 pm
Thanks Dick *NM*
Roy Morford -- 10/4/2001, 9:43 am
Re: glass as scrapers
Greg Root -- 9/25/2001, 8:45 am
Re: glass as scrapers
mike arnopol -- 9/25/2001, 8:51 am
Mike's a legend in these parts
Jim Pace -- 10/2/2001, 9:12 pm
Re: glass as scrapers
Chip Sandresky -- 9/24/2001, 3:06 pm
Re: glass as scrapers
mike arnopol -- 9/24/2001, 3:39 pm
Re: glass as scrapers
Shawn Baker -- 9/24/2001, 5:56 pm
Re: glass as scrapers
100GRIT -- 9/24/2001, 5:13 pm