Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: steaming wrc?
By:Greg Stamer
Date: 8/21/2001, 3:05 pm
In Response To: steaming wrc? (daren neufeld)

: does wrc benifit from soaking when trying to bend extreme curves? the ribs on
: my sof have some real tight bends. i've broken the midships rib twice.
: daren.......

Daren,

Most folks I know have used flatsawn red or white oak for ribs in true Greenland SOF kayaks, green is best, but kiln-dried works too. Even with oak ribs, broken ribs are not uncommon for a kayak subjected to hard use so I personally wouldn't use wrc. As Kent mentioned, Harvey Golden, or the baidarka list, would be a great resource for you. Harvey has a list of his preferred woods and materials used on his kayaks at the link below (page down to the illustration of Harvey twisting a soaked and steamed rib). According to the text, Harvey prefers ash and white oak for ribs on Greenland kayaks.

Greg Stamer

Messages In This Thread

steaming wrc?
daren neufeld -- 8/21/2001, 12:03 am
Re: steaming wrc?
daren neufeld -- 8/21/2001, 9:12 pm
Re: steaming - a read
Dave Houser -- 8/21/2001, 5:37 pm
Re: steaming wrc?
Greg Stamer -- 8/21/2001, 3:05 pm
Re: steaming wrc?
Jim -- 8/21/2001, 10:27 am
Re: steaming wrc?
Rob Macks -- 8/21/2001, 11:32 am
Re: steaming wrc?
Roger Nuffer -- 8/21/2001, 9:50 am
Re: steaming wrc?
Roger Nuffer -- 8/21/2001, 9:46 am
Re: steaming wrc?
Kent LeBoutillier -- 8/21/2001, 6:24 am
Re: steaming wrc?
daren neufeld -- 8/21/2001, 9:49 am
Re: steaming wrc?
Kent LeBoutillier -- 8/21/2001, 11:28 am