Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: do a little painting...
By:Keith Marsh
Date: 8/13/2001, 11:51 am
In Response To: do a little painting... (Jim Eisenmenger)

Sounds like a good idea. Yes, I'd love to see the pictures! Thanks Jim.
- Keith

: I had ugly scarfs, so I came up with a paint design around the cockpit that
: covered the offending area. My brother did a different design and tied it
: into a smaller design on the bow and stern to cover a mark like yours.
: They look really nice. I recommend painting after epoxy and a layer or two
: of varnish - the paint may not stick as well (scuff the varnish under your
: paent pattern first), but you can sand off the paint easily that way if
: you don't like it. I will try to get pictures on file and email to you
: within a couple weeks.

: Jim

Messages In This Thread

Argh! Sanded through veneer layer on S&G deck
Keith Marsh -- 8/9/2001, 2:16 pm
do a little painting...
Jim Eisenmenger -- 8/10/2001, 9:13 pm
Re: do a little painting...
Keith Marsh -- 8/13/2001, 11:51 am
Re: Argh! Sanded through veneer layer on S&G deck
Keith Marsh -- 8/10/2001, 4:54 pm
Re: Argh! Its a Beauty Mark ;)
Roger Nuffer -- 8/9/2001, 9:36 pm
Re: Argh! Its a Beauty Mark ;)
Ric Altfather -- 8/10/2001, 1:00 pm
Re: Argh! Sanded through veneer layer on S&G deck
Keith Marsh -- 8/9/2001, 3:13 pm
Re: Argh! Sanded through veneer layer on S&G deck
Jim Kozel -- 8/9/2001, 9:59 pm
Re: Argh! Sanded through veneer layer on S&G deck
Jim Kozel -- 8/9/2001, 2:32 pm
Re: Argh
!RUSS -- 8/9/2001, 2:31 pm