Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Harbor Freight or other good scraper
By:Randy Knauff
Date: 4/30/2001, 2:01 pm
In Response To: Harbor Freight or other good scraper (Scott E. Davis)

I got mine thru "Woodcraft" company (1-800-2251153), catelog page 104, carbide tipped scrapers
14L11 = 2" for $15.99
14J32 = 1" for $14.99
14L10 = both of them for $25.75

Then our local Lowe (Eagle) hardware started carrying the same models.
They are invaluable, saved me many hours of sanding. I used them to taper edges of green cured tapes, remove drips, presanding smoothing and wood shaping.

Randy

Messages In This Thread

Harbor Freight or other good scraper
Scott E. Davis -- 4/30/2001, 1:29 pm
Re: Harbor Freight or other good scraper
Jim Pace -- 4/30/2001, 9:12 pm
Re: Harbor Freight or other good scraper
John Monfoe -- 5/1/2001, 6:01 am
Re: Harbor Freight or other good scraper
Les Nightingill -- 5/1/2001, 9:42 am
Re: 'scary sharp' in past post
Tony -- 5/1/2001, 3:39 pm
Re: 'scary sharp' in past post
Russell Brown -- 5/1/2001, 7:56 pm
Re: 'scary sharp' in past post
mike allen ---> -- 5/1/2001, 8:26 pm
Re: Thanks, Mike. *NM*
Tony -- 5/2/2001, 12:29 pm
Re: Harbor Freight or other good scraper
Bruce Heys -- 5/1/2001, 11:01 am
Re: Harbor Freight or other good scraper
peter czerpak -- 4/30/2001, 3:09 pm
Re: Harbor Freight or other good scraper
Jim -- 4/30/2001, 4:52 pm
Re: Harbor Freight or other good scraper
Randy Knauff -- 4/30/2001, 2:01 pm