Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Stitch N Glue question fix
By:Don Beale
Date: 6/15/1998, 12:45 pm

Well I fixed my Tred Avon. I cut the keel and spread it about 1/8" and taped the inside back up. Net result is a significant improvement in the low spot, and one little high spot that wasn't there before. Net difference in performance will probably be zip. I find it odd that there is another Tred Avon with the same flat spot. Perhaps other builders out there have one, too?

Messages In This Thread

Stitch N Glue question fix
Don Beale -- 6/15/1998, 12:45 pm
Re: Stitch N Glue question fix
NPenney -- 6/17/1998, 7:17 am
Re: kwality kentrull
Mark Kanzler -- 6/17/1998, 11:37 am
Re: kwality kentrull
Don Beale -- 6/17/1998, 9:38 pm
Re: kwality kentrull
NPenney -- 6/18/1998, 8:04 am