: I just put a sealer coat on a hull and then found a couple small glue spots I
: missed despite wetting down the hull twice. Obviously I need to get more
: light. I'd like to sand out these spots and re-seal but I'm pretty sure
: I'll have to sand the entire hull down, otherwise I'll have blotches of
: lighter color showing through where I sand.

: I'm hoping I'm wrong. Any thoughts/experience appreciated.
I had similar problems. After sanding down the spots ( which appeared to be
lighter because the epoxy doesn't get into the wood) and re-sealing
the areas were now darker than the surrounding area. addison