Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Another possibility for one-offs?
By:Grant Goltz
Date: 1/10/2001, 5:03 pm
In Response To: Another possibility for one-offs? (Brian Nystrom)

: I've seen Okoume advertised in 1.5mm thickness. Do you think it would be
: feasible to install a cambered deck of this thickness, 'glass it, laminate
: veneer to it, then 'glass over it?

Certainly could be done, but I would still want to vacuum bag it to get a good total bond of the veneer. Probably just a seasy to put on the glass and the veneer at the same time. You could cut the cockpit small so you have some exess edge to seal the film to, plus seal it around the edges, and then turn on the pump. Should work fine. Maybe we have something here...

Grant

Messages In This Thread

luan plywood
Tim James -- 1/6/2001, 1:58 am
Re: You say luan , I say lauan
George Cushing -- 1/8/2001, 2:23 pm
Re: luan plywood
Tom Jablonski -- 1/8/2001, 2:14 pm
Re: luan plywood *Pic*
Ross Leidy -- 1/6/2001, 5:33 pm
Re: luan plywood
daniel -- 1/9/2001, 4:44 pm
Re: luan plywood
Ross Leidy -- 1/10/2001, 12:00 am
Re: Sea Kayaker's Greenland S&G
daniel -- 1/10/2001, 1:33 pm
Re: Sea Kayaker's Greenland S&G
Ross Leidy -- 1/10/2001, 2:09 pm
Re: Another Luan Project *Pic*
Mike Hanks -- 1/6/2001, 11:09 am
Re: Another Luan Project
Jerry Hayes -- 1/6/2001, 3:18 pm
Re: luan plywood
Ken Finger -- 1/6/2001, 10:08 am
Re: luan plywood - Ugly?!?? *Pic*
Grant Goltz -- 1/7/2001, 1:00 am
Matching grain Patterns
mike allen -- 1/8/2001, 2:04 pm
Re: Matching grain Patterns *Pic*
Mike Hanks -- 1/8/2001, 10:08 pm
Re: Matching grain Patterns
Grant Goltz -- 1/8/2001, 8:09 pm
Continuous Matching Grain Stitchers
mike allen -- 1/9/2001, 2:25 pm
Re: How we match our decks
Grant Goltz -- 1/9/2001, 7:33 pm
Another possibility for one-offs?
Brian Nystrom -- 1/10/2001, 11:04 am
Re: Another possibility for one-offs?
Grant Goltz -- 1/10/2001, 5:03 pm
Re: example *Pic*
Grant Goltz -- 1/9/2001, 11:30 pm
matching patter
mike allen -- 1/10/2001, 9:27 pm
Re: matching patterns, etc - I ramble on
Grant Goltz -- 1/10/2001, 10:52 pm
Re: matching patterns
mike allen -- 1/11/2001, 10:07 pm
Re: Hey Mick, lets cook on these ideas a bit
Grant Goltz -- 1/11/2001, 11:21 pm
Re: Hey Mick, lets cook on these ideas a bit
mike allen -- 1/12/2001, 12:10 pm
Pattern Games
mike allen -- 1/9/2001, 4:54 pm
Re: Matching grain Patterns
mike allen -- 1/8/2001, 2:38 pm
Re: Matching grain Patterns *NM*
mike allen -- 1/8/2001, 2:27 pm
Re: luan plywood - Ugly?!??
Ken Finger -- 1/7/2001, 8:57 am
Re: Meranti price, etc.
Grant Goltz -- 1/7/2001, 3:33 pm
Re: luan plywood
Erez -- 1/6/2001, 9:29 am
Re: luan plywood *Pic*
Don B. -- 1/6/2001, 8:57 am
Re: Look at that Bumper!
George Cushing -- 1/8/2001, 1:20 pm
Re: Look at that Bumper!
Don B. -- 1/8/2001, 1:47 pm
Re: luan plywood
Paul Lund -- 1/6/2001, 6:48 am
Re: luan plywood *Pic*
Mike Hanks -- 1/6/2001, 2:46 am