Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Plunger pumps.
By:Erez
Date: 1/4/2001, 3:49 pm
In Response To: Plunger pumps. (John Monfoe)

here are relevant links :

http://www.whalepumps.com/

http://www.bosworth.thomasregister.com/olc/bosworth/home.htm

http://www.bosworth.thomasregister.com/olc/bosworth/page3.htm

I haven't checked them for a while - dunno if they still exist.

I have the guzzler 500 , it's HUGE, its intake is 2" diam'.

If you plan on using 2 pumps, think about the guzzler 450 .
they are 1.5" diam & few builders here testified it's enough for them.
they are good strong pumps.
I assume your kayak is not take-a-part, so you could install them
flushed with the bulkhead.

a word about your venture: the materials you use should survive use in salt water. I'm not sure if a valve from a dust mask can do it.

good luck,

Erez

Messages In This Thread

Plunger pumps.
John Monfoe -- 1/4/2001, 6:23 am
Re: Plunger pumps.
Erez -- 1/4/2001, 3:49 pm
Toilet Plunger Idea
mike allen -- 1/4/2001, 12:28 pm
Re: Toilet Plunger Idea
John Monfoe -- 1/5/2001, 3:16 am
Re: Toilet Plunger Idea
mike allen -- 1/5/2001, 11:26 am