Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Runnnnss------
By:Jerry Siegel
Date: 8/28/2000, 10:20 pm
In Response To: Re: Applying epoxy with rollers (Don Beale)

: Ive given up on not getting any runs.

Don, keep a close eye on your epoxy as it sets. When it has started to kick, get in there with your sqeegee and knock those runs flat. They usually don't have time to reform before thr epoxy reaches the no sag stage. Saves lots of sanding later. Jerry

Messages In This Thread

Applying epoxy with rollers
Jimmy -- 8/28/2000, 2:15 pm
Re: Applying epoxy with rollers
Don Beale -- 8/28/2000, 4:46 pm
Runnnnss------
Jerry Siegel -- 8/28/2000, 10:20 pm
Re: Runnnnss------
Don Beale -- 8/29/2000, 10:11 am
Re: Applying epoxy with rollers
Larry C. -- 8/28/2000, 5:35 pm
Re: Applying epoxy with rollers
Gary -- 8/28/2000, 8:51 pm
Re: Applying epoxy with rollers
Jeff Fine -- 8/28/2000, 3:23 pm
Exactly...Squeegee = good, brushes = bad
Dale Frolander -- 8/28/2000, 5:01 pm
A better squeegee----
Jerry Siegel -- 8/28/2000, 10:11 pm
Re: A better squeegee----
Mike -- 9/1/2000, 2:13 am
Re: A better squeegee----
Rick -- 8/29/2000, 9:39 am
Your welcome--
Jerry Siegel -- 8/29/2000, 4:09 pm
Re: Applying epoxy with rollers
Jimmy -- 8/28/2000, 3:59 pm
Re: Bucking the trend, using a brush
Nick Schade - Guillemot Kayaks -- 8/29/2000, 3:47 pm
Re: Bucking the trend, using a brush
Don -- 8/30/2000, 2:18 am
Re: Bucking the trend, using a brush
Nick Schade - Guillemot Kayaks -- 8/30/2000, 9:21 am
foam brushes
Jimmy -- 8/30/2000, 4:30 am
Re: foam brushes
peter czerpak -- 8/30/2000, 7:51 am
Re: Applying epoxy with rollers
Ross Leidy -- 8/28/2000, 4:18 pm
Re: Applying epoxy with rollers
peter czerpak -- 8/28/2000, 2:28 pm
Re: Applying epoxy with rollers
Jimmy -- 8/28/2000, 3:54 pm