Charlie,

I traced my plans onto tracing paper, then glued them to the wood with 3M Spray Mount (I think), it worked perfectly. I'll check the can tonight. My wife was a graphic designer, so I had her pick out the good stuff. I used it on OSB and had no problems whatsoever using both a band saw and a jigsaw.

Mike

: All: I'm just about ready to start cutting out my forms. So as a test, I used
: some spray adhesive to stick the paper to the plywood. I let it dry, but
: when I went to cut out the form, the paper kept bunching up, ripping,
: shredding, etc...basically it was a terrible mess, and there is no way I
: will be able to follow the lines. The spray adhesive I used was made by
: Elmer's (but I don't think it's the same as the white glue stuff, at least
: it smells different), and it seemed to stick the forms on well, but I was
: still able to peel them off a day later.

: Any suggestions on a better adhesive?

: I forgot to mention, I don't have access to a bandsaw, so I'm using a hand
: held jig-saw (black & decker), which is probably making the problem
: worse.

: Thanks in advance.

: -Charlie