Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: It's a surfski!
By:Ken Finger
Date: 6/28/2000, 11:47 am
In Response To: Magnum PI (Eric Richards)

: Anyway those of you old enough to remember Magnum PI, at the close of a
: show or when he was stressed he would frequently get his
: "kayak?" and take it out. Is that a kayak? It seemed much more
: narrow than a kayak and he was sitting on top of it instead of inside it.
: What is it designed for? What is the advantage/disadvantage of this type?

The boat Magnum paddled is called a surfski. It is similar to a sit-on-top kayak with the exception you noted - it is narrower. I've never used one (or any sit-on-top), but my understanding is that they are designed for one thing - speed. Current Designs makes a fiberglass version called, appropriately, a "Speedster". It is long and narrow, and looks like it can live up to its name. Some kayak shops allow demos, so if a local shop carries Current Designs kayaks, you might be able to give it a try.

As for building one, you are probably out of luck. I am not aware of any plans or kits for sit-on-top types of boats. There were some messages on this board a while back on modifying plans to make a sit-on-top, but I haven't heard of anyone actually attempting it. The thoughts were to use the kayak's hull design, and then make radical modifications to the deck to create the open cockpit.

Messages In This Thread

Magnum PI
Eric Richards -- 6/28/2000, 10:21 am
Re: Magnum PI
Berkeley C. -- 6/29/2000, 12:52 pm
Re: Magnum PI
Paul C -- 6/28/2000, 3:02 pm
Re: Magnum PI
Phil Cross -- 6/28/2000, 11:35 pm
Checkout: www.surfski.com
David Bryson -- 6/28/2000, 1:06 pm
Re: Magnum PI
Mark -- 6/28/2000, 11:48 am
Re: Magnum PI
Mike Hanks -- 6/28/2000, 11:47 am
Re: It's a surfski!
Ken Finger -- 6/28/2000, 11:47 am
Re: Magnum PI *Pic*
Dean Trexel -- 6/28/2000, 11:24 am