Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Hatch Gaskets
By:Michael Brokenshire
Date: 6/18/2000, 3:10 pm
In Response To: Re: Hatch Gaskets (Larry C.)

: Erez, Just got back from The No Octane regatta and I have hands on experience
: with Ross's hatch system. It rained very hard all morning and someone ask
: Ross about keeping water out of the compartments. He opened a hatch and
: there was no leakage even after a deluge of heavy rain. The finger hole on
: the strip deck made for easy opening and the single strap on each side
: held the hatch securely. I'm convinced.

: What I did on my Coho was drill the holes for the Pygmy straps but made them
: undersized for a tight bungee with a knot on the inside. I have been
: paddling, rolling, etc. for 3 seasons (this is 3rd.) with the bungees as
: hold downs and I dont have any leaks yet. My intention was to buy the
: straps from Pygmy if the bungees did not work. That is why I drilled the
: holes where the straps shoud be. If I decide to use straps some day, snip
: the bungees and install the straps but for now I like the non leaking
: system I have.

: Larry C. OK, another side heard from. But, to get back to my original question, What kind of gasket material did you use? Michael

Messages In This Thread

Hatch Gaskets
Michael Brokenshire -- 6/16/2000, 8:28 pm
Re: Hatch Gaskets
Erez -- 6/16/2000, 10:27 pm
Re: Hatch Gaskets
peter czerpak -- 6/19/2000, 10:26 am
Re: Hatch Gaskets
Erez -- 6/19/2000, 6:31 pm
Re: Hatch Gaskets
peter czerpak -- 6/20/2000, 7:29 am
Re: Hatch Gaskets
Gary B. -- 6/17/2000, 12:41 am
Re: Hatch Gaskets *Pic*
Erez -- 6/17/2000, 4:41 am
Re: Hatch Gaskets
Larry C. -- 6/17/2000, 8:33 pm
Re: Hatch Gaskets
Michael Brokenshire -- 6/18/2000, 3:10 pm
Re: Hatch Gaskets
Ross Leidy -- 6/18/2000, 6:31 pm
Re: Hatch Gaskets
Larry C. -- 6/18/2000, 4:54 pm
Re:what the hell did I do wrong ?
Erez -- 6/18/2000, 5:47 pm
Re:what the hell did I do wrong ?
Larry C. -- 6/18/2000, 6:37 pm
Re: I'll do it !! thx.
Erez -- 6/19/2000, 6:22 pm
Re:what the hell did I do wrong ?
Erez -- 6/19/2000, 6:21 pm