Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Making your own foot pump...
By:Dean Trexel
Date: 5/9/2000, 9:53 pm
In Response To: Re: Making your own foot pump... (Shawn B)

:I really have no idea what to use for a diaphragm. I've
: often considered inner tube, and while it's a good piston pump seal, I
: think it would be too fragile for a diaphragm.

Funny you should use the word 'diaphragm', because that leads to an interesting solution. I've heard that women can use a silicone rubber sheet, called a dental dam, for a female condom. [Obviously the dental part means it was intended for a different orifice.]

O.K., sexual stuff aside, at work we use silicone rubber sheets for 'vac-wrap' machines -- machines that draw a vacuum under a part to apply pressure, often for pressing on fabrics or carpets that have pressure-sensitive adhesives. These bladders of silicone rubber conform to the shape of the part, and are cycled thousands of times before they tear. The stuff we use is about 1-1.5mm thick or so. You should be able to get it thru industrial suppliers like Granger or thru medical supply stores like White & White.

Dean

(people will be wondering about me after this post...)

Messages In This Thread

bilge pump
LARRY OBENSHAIN -- 5/8/2000, 10:09 pm
Re: bilge pump
Erez -- 5/9/2000, 1:59 am
Re: bilge pump
Jack Martin -- 5/8/2000, 11:29 pm
Re: bilge pump/battery sources
John B. -- 5/9/2000, 10:14 am
Re: bilge pump/battery sources
lee -- 5/10/2000, 7:07 pm
Re: bilge pump/battery sources
Robert Woodard -- 5/10/2000, 6:33 am
Re: bilge pump/battery sources
David Bryson -- 5/9/2000, 4:49 pm
Re: bilge pump/battery sources...Thanks!
John B. -- 5/9/2000, 5:50 pm
Gel Cell
Jason -- 5/9/2000, 4:27 pm
Re: bilge pump/battery sources
Charles Cooper -- 5/9/2000, 12:47 pm
Re: Guzzler
Mike Hanks -- 5/8/2000, 11:19 pm
Re: Guzzler
Jack Sanderson -- 5/12/2000, 10:52 am
Re: bilge pump
Travis -- 5/8/2000, 11:01 pm
Re: Pete Roszyk is the "foot pump guy"
Shawn B -- 5/9/2000, 10:56 am
A Candidate Foot Pump Design *Pic*
Tim Stough -- 5/10/2000, 12:26 am
Re: A Candidate Foot Pump Design *Pic*
Shawn B -- 5/11/2000, 6:36 pm
More wild ideas.
Dale Frolander -- 5/10/2000, 2:10 am
Re: More wild ideas.
Tim Stough -- 5/10/2000, 11:34 am
Spring design
Dale Frolander -- 5/11/2000, 1:51 am
Re: Pete Roszyk is the "foot pump guy" *Pic*
Tim Stough -- 5/10/2000, 12:21 am
Re: Making your own foot pump...
Tim Stough -- 5/9/2000, 4:04 pm
Re: Making your own foot pump...
Shawn B -- 5/9/2000, 7:07 pm
Re: Making your own foot pump...
Tony -- 5/10/2000, 9:17 pm
Re: Making your own foot pump...
Dean Trexel -- 5/9/2000, 9:53 pm
Re: bilge pump
David Blodgett -- 5/8/2000, 10:52 pm